WDS Speeds Fixed

Dave dave
Mon Apr 7 20:03:03 PDT 2003

Hi Jouni,

Yep...they are about 2" apart in a Soekris 4511 board. One is a Mini-PCI and
one is a PCMCIA...

They both terminate into N-Female bulkheads where LMR400 is run to the
external antennas...one directional and one omni...both mounted on same

I have somewhat resolved some of the problem....I don't know how but now I
am seeing about 250Kbps...still not the 500Kbps that I would expect to see
but it is heading in the right direction.



> On Sun, Apr 06, 2003 at 01:35:36AM -0800, Dave wrote:
> > Is there something I should be looking out for on the bridge on AP1 or
> > something? It is obvious to me that the bottleneck is not the WDS link
> > between AP1 and AP2 nor is the bottleneck between the STA and AP1 since
> > between all of them I can get full speed...but when going through the
> > on AP1 I am losing most of the bandwidth....any ideas?
> How close to each other are the two radios in AP1? Are you using
> external antennas? I have seen lot of interference when placing two
> radios close to each other, even if they are using channels 1 and 11.
> --
> Jouni Malinen                                            PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap

More information about the Hostap mailing list