Trying to install hostap on a UltraSPARC running Debian

Olivier Bornet Olivier.Bornet
Wed Nov 13 16:37:10 PST 2002


Hello,

> > I have a new starter kit with two PCMCIA USR Robotics 2410 cards. I have
> > also one "adapter" for PCI to put one of this card in a PCI-based
> > computer.
> 
> Could you please send the part describing the PLX-based adapter from
> 'lspci -vvv' output so that I could check that the PCI resources are as
> expected?

here is it:

cool:obornet 513% lspci -vvv -s 02:03
02:03.0 Network controller: Unknown device 16ec:3685 (rev 02)
        Subsystem: Unknown device 1638:00e2
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 6747200
        Region 1: I/O ports at 2000400 [size=128]
        Region 2: Memory at 000001ff00008000 (32-bit, non-prefetchable) [size=4K]
        Region 3: I/O ports at 2000480 [size=64]

> You could test commenting initialization by commenting 'goto fail;'
> line out after that error message in hostap_plx.c. I'm not sue,
> whether this helps, but it should be easy to test.

Ok. This helps to runs a little bit more. ;-) Now, the driver stop with
the message :

Nov 14 01:30:59 cool kernel: hostap_plx: hostap_plx.c 0.0.0 2002-10-12 (SSH Communications Security Corp, Jouni Malinen)
Nov 14 01:30:59 cool kernel: hostap_plx: (c) Jouni Malinen <jkmaline at cc.hut.fi>
Nov 14 01:30:59 cool kernel: PLX9052 PCI/PCMCIA adapter: mem=0x1ff00008000, plx_io=0x2000400, irq=6747200, pccard_io=0x2000480
Nov 14 01:30:59 cool kernel: hostap_plx: Could not enable Local Interrupts
Nov 14 01:30:59 cool kernel: hostap_plx: Registered netdevice wlan0
Nov 14 01:30:59 cool kernel: wlan0: hfa384x_cmd - timeout - reg=0xa200
Nov 14 01:30:59 cool kernel: hostap_plx: first command failed - is the card compatible?
Nov 14 01:30:59 cool kernel: hostap_plx: Initialization failed
Nov 14 01:30:59 cool kernel: hostap_plx: Netdevice wlan0 unregistered
Nov 14 01:30:59 cool kernel: hostap_plx: No devices found, driver not installed.

There is an timeout with the first command (hfa384x_cmd)...
And just for info, I know the card is compatible : I use the same in my
x86 laptop. ;-)

Good day, and thanks for the help.

		Olivier
-- 
Olivier Bornet                 |      fran?ais : http://puck.ch/f
Swiss Ice Hockey Results       |      english  : http://puck.ch/e
http://puck.ch/                |      deutsch  : http://puck.ch/g
Olivier.Bornet at puck.ch         |      italiano : http://puck.ch/i
Get my PGP-key at http://puck.ch/pgp or at http://wwwkeys.pgp.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20021114/d011033a/attachment.pgp 



More information about the Hostap mailing list