DHCP Problems

[Craig Whitmore]

Hi there

We have hostap up and running and if we set an ip address on the remote card
(winXP machine) we can ping the linux box and internet access works 100%,
But if we run DHCPD on the linux box to give the ip address to the WinXP
machine we get lots of errors as below. Can anyone know what is causing this
and can help?

I've tried the latest stable version and the latest CVS version (upto about
5 mins ago) with the same problem.

Thanks
Craig Whitmore
Orcon Internet
http://www.orcon.net.nz


Dec 11 11:32:10 wireless kernel:    FC=0x0080 (type=0:8) dur=0x0000
seq=0xcccc data_len=52428
Dec 11 11:32:10 wireless kernel:    A1=ff:ff:00:60:1d:f2
A2=32:47:00:60:1d:f2 A3=32:47:f0:d2:cc:cc A4=cc:ec:29:00:cc:cc
Dec 11 11:32:10 wireless kernel:    dst=cc:cc:44:4c:cc:c8
src=cc:dc:00:29:8d:d1 len=19416
Dec 11 11:32:10 wireless kernel: wlan0: RX: len(16717) > MAX(2304)
Dec 11 11:32:10 wireless kernel: wlan0: Received frame with invalid length
0x8050
Dec 11 11:32:10 wireless kernel: wlan0: RX status=0x8000 (port=0, type=4,
fcserr=0) silence=3 signal=39 rate=20 rxflow=0; jiffies=669659
Dec 11 11:32:10 wireless kernel:    FC=0x0080 (type=0:8) dur=0x0000
seq=0x8050 data_len=32848
Dec 11 11:32:10 wireless kernel:    A1=ff:ff:ff:ff:00:60
A2=1d:f2:32:47:00:60 A3=1d:f2:32:47:30:d3 A4=50:80:50:80:29:00
Dec 11 11:32:10 wireless kernel:    dst=50:80:50:80:50:80
src=50:80:50:80:00:29 len=32385
Dec 11 11:32:10 wireless kernel: wlan0: Received frame with invalid length
0xcccc
Dec 11 11:32:10 wireless kernel: wlan0: RX status=0x8000 (port=0, type=4,
fcserr=0) silence=2 signal=39 rate=20 rxflow=0; jiffies=669680
Dec 11 11:32:10 wireless kernel:    FC=0x0080 (type=0:8) dur=0x0000
seq=0xccc8 data_len=52428
Dec 11 11:32:10 wireless kernel:    A1=ff:ff:00:60:1d:f2
A2=32:47:00:60:1d:f2 A3=32:47:50:d3:cc:4c A4=cc:cc:29:00:cc:cd
Dec 11 11:32:10 wireless kernel:    dst=cd:8c:cc:c5:cc:cc
src=cc:cc:00:29:88:a1 len=21464
Dec 11 11:32:10 wireless kernel: wlan0: RX: len(5143) > MAX(2304)
Dec 11 11:32:10 wireless kernel: wlan0: Received frame with invalid length
0x8cce
Dec 11 11:32:10 wireless kernel: wlan0: RX status=0x8000 (port=0, type=4,
fcserr=0) silence=2 signal=40 rate=20 rxflow=0; jiffies=669700

---------------
Dec 11 11:37:10 wireless kernel: hostap_cs: 0.0.0 CVS (Jouni Malinen
<jkmaline at cc.hut.fi>)
Dec 11 11:37:10 wireless kernel: hostap_cs: index 0x01: Vcc 5.0, irq 3, io
0x0100-0x013f
Dec 11 11:37:10 wireless kernel: hostap_cs: Registered netdevice wlan0
Dec 11 11:37:10 wireless kernel: wlan0: NIC: id=0x800c v1.0.0
Dec 11 11:37:10 wireless kernel: wlan0: PRI: id=0x15 v1.0.7
Dec 11 11:37:10 wireless kernel: wlan0: STA: id=0x1f v1.3.5
---------------
wireless:/archives/hostap/utils# ./hostap_diag wlan0
Host AP driver diagnostics information for 'wlan0'

NICID: id=0x800c v1.0.0 (PRISM II (2.5) PCMCIA (SST parallel flash))
PRIID: id=0x0015 v1.0.7
STAID: id=0x001f v1.3.5 (station firmware)
-----------------

wireless:/archives/hostap# cardctl info
PRODID_1="D"
PRODID_2="Link DWL-650 11Mbps WLAN Card"
PRODID_3="Version 01.02"
PRODID_4=""
MANFID=0156,0002
FUNCID=6
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255