ad-hoc works but master does not

[Brian Sugar]

some more questions:

how can the access point give out ips?
how do i set the ip of the access point?


On Sunday, December 8, 2002, at 01:00  PM, Brian Sugar wrote:

> cool it worked!
>
> i can get online via my g4 powerbook.  next question - can i set the 
> ifconfig eth0???  how can i get to the access point via ssh or http??
>
>
> On Sunday, December 8, 2002, at 12:37  PM, Doug Yeager wrote:
>
>> yep,
>> i do it successfully right now on two different machines using wmp11 
>> pci card.
>> prism2_srec -rv wlan0 rf010506.hex
>>
>>
>>
>> At 12:17 PM 12/08/2002 -0800, you wrote:
>>> i don't have a windows machine so i'll have to RAM upload...can i do 
>>> this with the wmp11?
>>>
>>> On Saturday, December 7, 2002, at 08:37  PM, Jason Boxman wrote:
>>>
>>>> On Saturday 07 December 2002 11:29 pm, Brian Sugar wrote:
>>>>> redhat 8.0 - master
>>>>> mac os x.2 - client
>>>>>
>>>>> cannot see access point when redhat box is in master mode only in
>>>>> ad-hoc mode.  i have the non broadcom linksys wmp11 pci card (1.4.2
>>>>> firmware) in the rh box.
>>>>
>>>> STA 1.4.2 is widely known to be quite busted.  You need to upgrade 
>>>> or
>>>> downgrade your firmware.  If you can't flash it, you can RAM upload 
>>>> 1.4.9.
>>>>
>>>> Check out my HostAP 2002-10-12 howto:
>>>>
>>>> http://trekweb.com/~jasonb/articles/hostap_20021012.shtml
>>>>
>>>>> btw kernel 2.4.20
>>>>>
>>>>> help, pls
>>>>
>>>> --
>>>>
>>>> Jason Boxman
>>>> Administrator TrekWeb.COM
>>>> http://trekweb.com/~jasonb/articles/ - Linux Pages
>>>>
>>>>
>>>> _______________________________________________
>>>> HostAP mailing list
>>>> HostAP at shmoo.com
>>>> http://lists.shmoo.com/mailman/listinfo/hostap
>>>
>>> _______________________________________________
>>> HostAP mailing list
>>> HostAP at shmoo.com
>>> http://lists.shmoo.com/mailman/listinfo/hostap
>>
>> _______________________________________________
>> HostAP mailing list
>> HostAP at shmoo.com
>> http://lists.shmoo.com/mailman/listinfo/hostap
>>
>