Still getting Command exit code 1 (raw code = 256) with 2.85?

[Walters, Mark]

Thanks for the suggestions, I'm running non-root and I don't have an /etc/get_iplayer directory.  I've removed the ~/.get_iplayer directory completely but it hasn't helped.

Mark

-----Original Message-----
From: get_iplayer [mailto:get_iplayer-bounces at lists.infradead.org] On Behalf Of Nick
Sent: 30 January 2014 14:10
To: get_iplayer at lists.infradead.org
Subject: Re: Still getting Command exit code 1 (raw code = 256) with 2.85?

On Thu, 30 Jan 2014 07:22:19 -0600
"Walters, Mark" <Mark_Walters at bmc.com> wrote:

> Thanks Chris, same result I'm afraid;

Try clearing out the contents of /etc/get_iplayer/options, in my ~/.get_iplayer/options file I have no swy verify bit. IIRC that was needed historically to work around some BBC changes to the service.

Also, you are being naughty and running get_iplayer as root (the # prompt gave it away ;) Or you are just using a terminal/shell I'm not as familiar with). g_ip and rtmpdump should always work AOK as a user (unless either can do privileged stuff (like open a port <1024) and I don't think I've seen that).

Though a tidy-up of /etc/get_iplayer and any ~/.get_iplayer directories might be worth it too, just to simplify things if there is a good reason why you are trying to download with two accounts.

GL, HTH, etc.
Nick

> 
> [vortexbox.localdomain iplayer]# ./get_iplayer --mode=flashhd
[snip]
> WARNING: Failed to stream
> file 
> /software/iplayer/Katie_Morag_-_10._Katie_Morag_and_the_Tiresome_Ted_b
> 03lb92t_default.partial.mp4.flv via RTMP INFO: skipping flashhd2 mode 
> ERROR: Failed to record 'Katie Morag - 10. Katie Morag and the 
> Tiresome Ted (b03lb92t)'
> 
> -----Original Message-----
> From: get_iplayer [mailto:get_iplayer-bounces at lists.infradead.org] On 
> Behalf Of Chris Marriott Sent: 30 January 2014 13:19
> To: get_iplayer at lists.infradead.org
> Subject: Re: Still getting Command exit code 1 (raw code = 256) with 
> 2.85?
> 
> 
> 
> -----Original Message-----
> From: Walters, Mark
> Sent: Thursday, January 30, 2014 12:58 PM
> To: get_iplayer at lists.infradead.org
> Subject: Still getting Command exit code 1 (raw code = 256) with 2.85?
> 
> >I'm unable to download any files as I keep getting the Command exit 
> >code 1 (raw code = 256) error from rtmpdump.  I'm using >get_iplayer
> >2.85 and rtmpdump 2.4.
> >
> >Can anyone suggest what might be wrong?
> 
> Hi Mark
> 
> Rather than all convoluted stuff you posted, what happens if you 
> simply download it directly from the command line?
> 
> get_iplayer --mode=flashhd --pid=b03lb92t
> 
> Cheers,
> 
> Chris
> 
> 
> _______________________________________________
> get_iplayer mailing list
> get_iplayer at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/get_iplayer
> 
> _______________________________________________
> get_iplayer mailing list
> get_iplayer at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/get_iplayer


_______________________________________________
get_iplayer mailing list
get_iplayer at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/get_iplayer