v2026.05.0

[Alexander Shiyan]

Hello Sascha.

There is only output from sdram-init binary, then silence.

shc at gentoo /home/ARM64/barebox/firmware $ ls -1hs rk3568*
396K rk3568-bl31.bin
4.0K rk3568-bl31.bin.gen.S
460K rk3568-bl31.bin.gen.pbl.o
4.0K rk3568-bl31.bin.sha.bin
64K rk3568-bl31.bin.z
456K rk3568-bl32.bin
4.0K rk3568-bl32.bin.gen.S
624K rk3568-bl32.bin.gen.pbl.o
4.0K rk3568-bl32.bin.sha.bin
168K rk3568-bl32.bin.z

Can you compare them with your files?
I understand the versions may differ, but the size should be roughly the same.

Thanks!

ср, 20 мая 2026 г. в 09:21, Sascha Hauer <s.hauer at pengutronix.de>:
>
> Hi Alexander,
>
> On 2026-05-20 08:15, Alexander Shiyan wrote:
> > Hello Sascha.
> >
> > The first launch of the new release has failed.
> > On the RK3568 platform, BL31 does not start. The size of the final
> > binary has decreased from 1.5 MB
> > to 930 KB - possibly due to the announced compression, but it seems to
> > me that this is too
> > large a reduction...
> > Are there any additional settings/calls required for custom boards in
> > the new release?
>
> No board level adjustments required. I just re-tested the relase on a
> Rock-3a board using rockchip_v8_defconfig. It works here.
>
> The size reduction depends on the size of your firmware binaries. You
> could look at the firmware/*.z files and compare with the original files
> to see if that explains the size reduction. The TF-A and OP-TEE files
> that I use only have around 700KiB in total, so a size reduction of
> 600KiB would be unreasonable in my case.
>
> Do you have any console output to share?
>
> Sascha
>
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |