v2026.05.0

[Sascha Hauer]

Hi Alexander,

On 2026-05-20 08:15, Alexander Shiyan wrote:
> Hello Sascha.
> 
> The first launch of the new release has failed.
> On the RK3568 platform, BL31 does not start. The size of the final
> binary has decreased from 1.5 MB
> to 930 KB - possibly due to the announced compression, but it seems to
> me that this is too
> large a reduction...
> Are there any additional settings/calls required for custom boards in
> the new release?

No board level adjustments required. I just re-tested the relase on a
Rock-3a board using rockchip_v8_defconfig. It works here.

The size reduction depends on the size of your firmware binaries. You
could look at the firmware/*.z files and compare with the original files
to see if that explains the size reduction. The TF-A and OP-TEE files
that I use only have around 700KiB in total, so a size reduction of
600KiB would be unreasonable in my case.

Do you have any console output to share?

Sascha

--
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |