[PATCH 2/6] arm: socfgpa: agilex5: remove mailbox_s10 from barebox proper

[Michael Tretter]

The mailbox_s10 is only used to retrieve the QSPI configuration from the
SDM. The barebox PBL retrieves this configuration and stores the result
in a handover register. barebox proper retrieves the status from the
handover register and doesn't interact with the SDM via mailbox_s10 get.

Thus, remove malbox_s10 from barebox proper, since it's not used there.

Signed-off-by: Michael Tretter <m.tretter at pengutronix.de>
---
 arch/arm/mach-socfpga/Makefile | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index c54d2a289341..6a8117874136 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -24,7 +24,6 @@ pbl-$(CONFIG_ARCH_SOCFPGA_AGILEX5) += soc64-system-manager.o \
 				atf.o
 
 obj-$(CONFIG_ARCH_SOCFPGA_AGILEX5) += secure_reg_helper.o \
-			        mailbox_s10.o \
 				      smc_api.o
 
 ifdef CONFIG_ARCH_SOCFPGA_CYCLONE5

-- 
2.47.3