[PATCH 0/5] Hexagon Geosystems GS05 Board Support

[Marco Felsch]

On 26-02-05, Marco Felsch wrote:
> Hi,
> 
> this series adds the support for the Hexagon Geosystems GS05 product
> [1]. The GS05 is part of a larger product family from SW pov, therefore
> most logic is implemented below 'common/boards/hgs'.
> 
> The board support was added before the new security-profiles made it
> into barebox mainline, therefore security-profiles aren't used yet but
> maybe in the future.
> 
> Further products will be send mainline as well, once this basic support
> got merged.
> 
> Patch1-2 were also sent here [2] in parallel.

I forgot to mention, that this patchset depends on:

https://lore.kernel.org/barebox/20260204-v2025-09-0-topic-optee-of-handling-v2-0-da075e6818e0@pengutronix.de/

> Regards,
>   Marco
> 
> [1] https://leica-geosystems.com/de-de/products/gnss-systems/smart-antennas/leica-gs05
> [2] https://lore.kernel.org/barebox/20260204151645.1426068-1-m.felsch@pengutronix.de/
> 
> Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
> ---
> Marco Felsch (5):
>       ARM: i.MX8MM: add MX8MM_PAD_CTL defines
>       lib: hexdump: make use of pr_print
>       mfd: Add Hexagon EFI driver
>       watchdog: Add Hexagon EFI watchdog driver
>       ARM: i.MX8MM: add Hexagon Geosystems GS05
> 
>  arch/arm/boards/Makefile                          |    1 +
>  arch/arm/boards/hgs-gs05/Makefile                 |    6 +
>  arch/arm/boards/hgs-gs05/board.c                  |  237 +++++
>  arch/arm/boards/hgs-gs05/flash-header-gs05.imxcfg |   12 +
>  arch/arm/boards/hgs-gs05/lowlevel.c               |  128 +++
>  arch/arm/boards/hgs-gs05/lpddr4-timing.c          | 1118 +++++++++++++++++++++
>  arch/arm/dts/Makefile                             |    1 +
>  arch/arm/dts/imx8m-hgs-common.dtsi                |   80 ++
>  arch/arm/dts/imx8mm-hgs-gs05.dts                  |  320 ++++++
>  arch/arm/mach-imx/Kconfig                         |    8 +
>  commands/ethlog.c                                 |    4 +-
>  common/boards/Kconfig                             |   12 +
>  common/boards/Makefile                            |    1 +
>  common/boards/hgs/Makefile                        |    7 +
>  common/boards/hgs/common.c                        |  627 ++++++++++++
>  common/boards/hgs/lib.c                           |   73 ++
>  common/boards/hgs/pbl.c                           |  100 ++
>  drivers/mfd/Kconfig                               |    8 +
>  drivers/mfd/Makefile                              |    1 +
>  drivers/mfd/hgs-efi.c                             |  473 +++++++++
>  drivers/mtd/ubi/attach.c                          |    2 +-
>  drivers/watchdog/Kconfig                          |    9 +
>  drivers/watchdog/Makefile                         |    1 +
>  drivers/watchdog/hgs_efi_wdt.c                    |   88 ++
>  fs/ubifs/debug.c                                  |    4 +-
>  images/Makefile.imx                               |    2 +
>  include/boards/hgs/common.h                       |   84 ++
>  include/linux/printk.h                            |    4 +-
>  include/mach/imx/iomux-mx8mm.h                    |   10 +
>  include/mfd/hgs-efi.h                             |   46 +
>  include/printf.h                                  |    2 +-
>  include/soc/ti/cppi5.h                            |    2 +-
>  lib/hexdump.c                                     |   13 +-
>  33 files changed, 3467 insertions(+), 17 deletions(-)
> ---
> base-commit: 8781fc641fc147df639c9e767a89aa3277d2c9be
> change-id: 20260205-vmaster-customers-leicageo-system1600-f62320eed41f
> 
> Best regards,
> -- 
> Marco Felsch <m.felsch at pengutronix.de>
> 
> 

-- 
#gernperDu 
#CallMeByMyFirstName

Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |