[PATCH 0/5] Hexagon Geosystems GS05 Board Support

[Marco Felsch]

Hi,

this series adds the support for the Hexagon Geosystems GS05 product
[1]. The GS05 is part of a larger product family from SW pov, therefore
most logic is implemented below 'common/boards/hgs'.

The board support was added before the new security-profiles made it
into barebox mainline, therefore security-profiles aren't used yet but
maybe in the future.

Further products will be send mainline as well, once this basic support
got merged.

Patch1-2 were also sent here [2] in parallel.

Regards,
  Marco

[1] https://leica-geosystems.com/de-de/products/gnss-systems/smart-antennas/leica-gs05
[2] https://lore.kernel.org/barebox/20260204151645.1426068-1-m.felsch@pengutronix.de/

Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
Marco Felsch (5):
      ARM: i.MX8MM: add MX8MM_PAD_CTL defines
      lib: hexdump: make use of pr_print
      mfd: Add Hexagon EFI driver
      watchdog: Add Hexagon EFI watchdog driver
      ARM: i.MX8MM: add Hexagon Geosystems GS05

 arch/arm/boards/Makefile                          |    1 +
 arch/arm/boards/hgs-gs05/Makefile                 |    6 +
 arch/arm/boards/hgs-gs05/board.c                  |  237 +++++
 arch/arm/boards/hgs-gs05/flash-header-gs05.imxcfg |   12 +
 arch/arm/boards/hgs-gs05/lowlevel.c               |  128 +++
 arch/arm/boards/hgs-gs05/lpddr4-timing.c          | 1118 +++++++++++++++++++++
 arch/arm/dts/Makefile                             |    1 +
 arch/arm/dts/imx8m-hgs-common.dtsi                |   80 ++
 arch/arm/dts/imx8mm-hgs-gs05.dts                  |  320 ++++++
 arch/arm/mach-imx/Kconfig                         |    8 +
 commands/ethlog.c                                 |    4 +-
 common/boards/Kconfig                             |   12 +
 common/boards/Makefile                            |    1 +
 common/boards/hgs/Makefile                        |    7 +
 common/boards/hgs/common.c                        |  627 ++++++++++++
 common/boards/hgs/lib.c                           |   73 ++
 common/boards/hgs/pbl.c                           |  100 ++
 drivers/mfd/Kconfig                               |    8 +
 drivers/mfd/Makefile                              |    1 +
 drivers/mfd/hgs-efi.c                             |  473 +++++++++
 drivers/mtd/ubi/attach.c                          |    2 +-
 drivers/watchdog/Kconfig                          |    9 +
 drivers/watchdog/Makefile                         |    1 +
 drivers/watchdog/hgs_efi_wdt.c                    |   88 ++
 fs/ubifs/debug.c                                  |    4 +-
 images/Makefile.imx                               |    2 +
 include/boards/hgs/common.h                       |   84 ++
 include/linux/printk.h                            |    4 +-
 include/mach/imx/iomux-mx8mm.h                    |   10 +
 include/mfd/hgs-efi.h                             |   46 +
 include/printf.h                                  |    2 +-
 include/soc/ti/cppi5.h                            |    2 +-
 lib/hexdump.c                                     |   13 +-
 33 files changed, 3467 insertions(+), 17 deletions(-)
---
base-commit: 8781fc641fc147df639c9e767a89aa3277d2c9be
change-id: 20260205-vmaster-customers-leicageo-system1600-f62320eed41f

Best regards,
-- 
Marco Felsch <m.felsch at pengutronix.de>