[PATCH] ARM: tqmls1046a: Add Arkona AT300 support

[Steffen Trumtrar]

On 2026-04-13 at 09:58 +02, Sascha Hauer <s.hauer at pengutronix.de> wrote:

> On Tue, Apr 07, 2026 at 01:01:17PM +0200, Steffen Trumtrar wrote:
> > diff --git a/arch/arm/boards/tqmls1046a/board.c b/arch/arm/boards/tqmls1046a/board.c
> > index bce1838dbc..3c09bcdbf7 100644
> > --- a/arch/arm/boards/tqmls1046a/board.c
> > +++ b/arch/arm/boards/tqmls1046a/board.c
> > @@ -81,7 +81,11 @@ static int tqmls1046a_postcore_init(void)
> >  	}
> >  
> >  	ls1046a_bbu_mmc_register_handler("sd", "/dev/mmc0.barebox", sd_bbu_flags);
> > -	ls1046a_bbu_qspi_register_handler("qspi", "/dev/qspiflash0.barebox", qspi_bbu_flags);
> > +	ls1046a_bbu_qspi_register_handler("qspi", "/dev/qspiflash0.barebox",
> > +					  qspi_bbu_flags);
> > +	ls1046a_bbu_qspi_register_handler("qspi-alternate",
> > +					  "/dev/qspiflash1.barebox-alternate",
> > +					  0);
> 
> Is this part of the TQ SoM or Arkona specific? If the latter can we
> avoid registering it for the other variants?
>

While reviewing the patches I researched this and am 100% sure, that I read that the tqmls1046a supports up to 2 QSPIs. Of course, now I can't find this info for reference :( So, I'll add a compatible check before registering this alternate qspi.

> 
> > diff --git a/arch/arm/boards/tqmls1046a/rcwtool-at300.c b/arch/arm/boards/tqmls1046a/rcwtool-at300.c
> > new file mode 100644
> > index 0000000000..a68023b612
> > --- /dev/null
> > +++ b/arch/arm/boards/tqmls1046a/rcwtool-at300.c
> 
> This is handy to have and ideally the rcw values would be automatically
> generated during compilation, but let's not put too much effort in this.
> Can you move the code to a include file in scripts/include/ so that the
> rcwtool-at300.c becomes:
> 
> #include <rcwtool.h>
> 
> int main(void)
> {
> 	printf("# RCW values:\n");
> 	printf("\n");
> 
> 	set_val(SYS_PLL_CFG              ,       0);
> 	...
> 
> 	print_rcw();
> }
> 
> That way we could reuse it for other boards. Also add some comment to
> the header what it is and how it's used.
>

Will do.

> > +/dts-v1/;
> > +
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/gpio/gpio.h>
> > +
> > +#include <arm64/freescale/fsl-ls1046a-tqmls1046a.dtsi>
> > +#include "fsl-ls1046a.dtsi"
> > +
> > +/ {
> > +	model = "TQ TQMLS1046A SoM on Arkona AT300 board";
> > +	compatible = "arkona,at300", "tq,ls1046a-tqmls1046a", "fsl,ls1046a";
> > +
> > +	barebox,disable-deep-probe;
> 
> Is that needed? Why?

Good question. Maybe this is unneccessary meanwhile. I'll re-check.


Best regards,
Steffen

-- 
Pengutronix e.K.                | Dipl.-Inform. Steffen Trumtrar |
Steuerwalder Str. 21            | https://www.pengutronix.de/    |
31137 Hildesheim, Germany       | Phone: +49-5121-206917-0       |
Amtsgericht Hildesheim, HRA 2686| Fax:   +49-5121-206917-5555    |