[PATCH v2 00/10] ARM: boards: add support for Enclustra Mercury SA2

[David Picard]

Sorry, I didn't see your other message.

Le 30/09/2025 à 13:47, David Picard a écrit :
> Hi,
>
> I was about to submit v3, with the changes you requested.
>
> I was waiting for you to decide wether I keep the fallback MAC 
> addresses, as suggested by the manufacturer manual that I shared, or 
> if I drop them and let Barebox set a random one.
>
> David
>
> Le 30/09/2025 à 12:40, Sascha Hauer a écrit :
>> On Thu, 25 Sep 2025 13:59:07 +0200, David Picard wrote:
>>> Add support for the Enclustra Mercury+ SA2, a Cyclone V based
>>> SoC FPGA.
>>> https://www.enclustra.com/en/products/system-on-chip-modules/mercury-sa2/ 
>>>
>>>
>>> The SoM provides a 64MiB NOR QSPI flash, DDR3, Ethernet PHY, RTC.
>>>
>>> The Cyclone V features a hardware ARM core (aka HPS) that can boot
>>> from SD card (MMC), QSPI flash. This patch series focusses on MMC.
>>>
>>> [...]
>> Applied, thanks!
>>
>> [01/10] Add handoff files
>>          (no commit info)
>> [02/10] Add Enclustra Mercury+ SA2 module
>>          (no commit info)
>> [03/10] ARM: dts: socfpga: use upstream SA2 device tree
>>          (no commit info)
>> [04/10] ARM: dts: socfpga: adapt upstream SA2 device tree
>>          (no commit info)
>> [05/10] boards: enclustra-sa2: read MAC address from EEPROM
>>          (no commit info)
>> [06/10] boards: enclustra-sa2: configure SI5338
>>          (no commit info)
>> [07/10] boards: enclustra-sa2: enable SI5338
>>          (no commit info)
>> [08/10] lib: add crc16 support
>> https://git.pengutronix.de/cgit/barebox/commit/?id=83865ed69b4d (link 
>> may not be stable)
>> [09/10] nvmem: add support for Atmel sha204(a)
>> https://git.pengutronix.de/cgit/barebox/commit/?id=0837819622a2 (link 
>> may not be stable)
>> [10/10] boards: enclustra-sa2: read S/N from EEPROM
>>          (no commit info)
>>
>> Best regards,
>
>