[PATCH v2 00/10] ARM: boards: add support for Enclustra Mercury SA2

[Sascha Hauer]

On Thu, 25 Sep 2025 13:59:07 +0200, David Picard wrote:
> Add support for the Enclustra Mercury+ SA2, a Cyclone V based
> SoC FPGA.
> https://www.enclustra.com/en/products/system-on-chip-modules/mercury-sa2/
> 
> The SoM provides a 64MiB NOR QSPI flash, DDR3, Ethernet PHY, RTC.
> 
> The Cyclone V features a hardware ARM core (aka HPS) that can boot
> from SD card (MMC), QSPI flash. This patch series focusses on MMC.
> 
> [...]

Applied, thanks!

[01/10] Add handoff files
        (no commit info)
[02/10] Add Enclustra Mercury+ SA2 module
        (no commit info)
[03/10] ARM: dts: socfpga: use upstream SA2 device tree
        (no commit info)
[04/10] ARM: dts: socfpga: adapt upstream SA2 device tree
        (no commit info)
[05/10] boards: enclustra-sa2: read MAC address from EEPROM
        (no commit info)
[06/10] boards: enclustra-sa2: configure SI5338
        (no commit info)
[07/10] boards: enclustra-sa2: enable SI5338
        (no commit info)
[08/10] lib: add crc16 support
        https://git.pengutronix.de/cgit/barebox/commit/?id=83865ed69b4d (link may not be stable)
[09/10] nvmem: add support for Atmel sha204(a)
        https://git.pengutronix.de/cgit/barebox/commit/?id=0837819622a2 (link may not be stable)
[10/10] boards: enclustra-sa2: read S/N from EEPROM
        (no commit info)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>