[PATCH] ARM: i.MX: karo-tx6: use mmcboot handler

[Ahmad Fatoum]

On 10/21/25 4:41 PM, Fabian Pfitzner wrote:
> Use the mmcboot handler instead. This handler automatically determines
> the boot partition by considering the partition's state, thus avoiding
> to specify it manually.
> 
> Signed-off-by: Fabian Pfitzner <f.pfitzner at pengutronix.de>

Reviewed-by: Ahmad Fatoum <a.fatoum at pengutronix.de>

I think this is worth an entry in the migration guide. See the fixup I
just sent. I think Sascha can squash it if there are no other comments.

Cheers,
Ahmad

> ---
>  arch/arm/boards/karo-tx6x/board.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boards/karo-tx6x/board.c b/arch/arm/boards/karo-tx6x/board.c
> index f3ff59afb9..43e23f00cd 100644
> --- a/arch/arm/boards/karo-tx6x/board.c
> +++ b/arch/arm/boards/karo-tx6x/board.c
> @@ -115,7 +115,7 @@ static int tx6x_devices_init(void)
>  		of_device_enable_and_register_by_name("environment-nand");
>  		of_device_enable_and_register_by_alias("nand");
>  	} else {
> -		imx6_bbu_internal_mmc_register_handler("eMMC", "/dev/mmc3.boot0",
> +		imx6_bbu_internal_mmcboot_register_handler("eMMC", "/dev/mmc3",
>  						       BBU_HANDLER_FLAG_DEFAULT);
>  		of_device_enable_and_register_by_name("environment-emmc");
>  		of_device_enable_and_register_by_alias("mmc3");

-- 
Pengutronix e.K.                  |                             |
Steuerwalder Str. 21              | http://www.pengutronix.de/  |
31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |