[PATCH] fixup! ARM: i.MX: karo-tx6: use mmcboot handler

[Ahmad Fatoum]

Documentation: migration-2025.11.0: mention Karo bbu change

The existing method of hardcoding boot0 is not power-fail safe, so it's
hopefully not used by userspace to update the bootloader, but in any
case a warning sounds apt.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 .../migration-guides/migration-2025.11.0.rst        | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/migration-guides/migration-2025.11.0.rst b/Documentation/migration-guides/migration-2025.11.0.rst
index 9cbc46acc39b..a9c7abb66ef0 100644
--- a/Documentation/migration-guides/migration-2025.11.0.rst
+++ b/Documentation/migration-guides/migration-2025.11.0.rst
@@ -1,3 +1,6 @@
+Release v2025.11.0
+==================
+
 i.MX GPIOs
 ----------
 
@@ -5,3 +8,13 @@ Reading output GPIOs now returns the configured output level instead
 of reading back the input register. This aligns us with what Linux
 is doing, but may falsify readings of single-ended GPIOs that have
 the SION bit configured.
+
+Board support
+-------------
+
+Karo TX6X
+^^^^^^^^^
+
+The barebox update handler for this SoM no longer unconditionally updates
+/dev/mmc3.boot0, but instead it now updates the inactive boot partition
+on /dev/mmc3 and then sets it as active allowing for power-fail safety.
-- 
2.47.3