[PATCH] added zynq 7000 usb support

[Michael Graichen]

This adds support to use the USB interface on Zynq-7000 SoC.

Signed-off-by: Michael Graichen <michael.graichen at hotmail.com>
---
 drivers/usb/host/Kconfig     |  8 ++++++++
 drivers/usb/host/Makefile    |  1 +
 drivers/usb/host/ehci-zynq.c | 36 ++++++++++++++++++++++++++++++++++++
 3 files changed, 45 insertions(+)
 create mode 100644 drivers/usb/host/ehci-zynq.c

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d38b4dcac4..812270f869 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -14,6 +14,14 @@ config USB_EHCI_ATMEL
 	select USB_OHCI_AT91
 	bool "Atmel EHCI driver"
 
+config USB_EHCI_ZYNQ
+	bool "Support for Xilinx Zynq on-chip EHCI USB controller"
+	depends on ARCH_ZYNQ
+	select USB_EHCI
+	select USB_ULPI
+	help
+	  Enable support for Zynq on-chip EHCI USB controller
+
 config USB_OHCI
 	bool "OHCI driver"
 	depends on !MMU && HAS_DMA
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index e55dff4580..cbddfbe923 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -2,6 +2,7 @@
 obj-$(CONFIG_USB_EHCI)		+= ehci-hcd.o
 obj-$(CONFIG_USB_EHCI_OMAP)	+= ehci-omap.o
 obj-$(CONFIG_USB_EHCI_ATMEL)	+= ehci-atmel.o
+obj-$(CONFIG_USB_EHCI_ZYNQ)	+= ehci-zynq.o
 obj-$(CONFIG_USB_OHCI)		+= ohci-hcd.o
 obj-$(CONFIG_USB_OHCI_AT91)	+= ohci-at91.o
 obj-$(CONFIG_USB_XHCI)		+= xhci.o xhci-mem.o xhci-ring.o
diff --git a/drivers/usb/host/ehci-zynq.c b/drivers/usb/host/ehci-zynq.c
new file mode 100644
index 0000000000..f08e9a3c5c
--- /dev/null
+++ b/drivers/usb/host/ehci-zynq.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB Low level initialization(Specific to Zynq 7000)
+ */
+
+#include <common.h>
+#include <linux/usb/ulpi.h>
+
+static int zynq_ehci_probe(struct device_d *dev)
+{
+	struct resource *res;
+	void __iomem *base;
+
+	res = dev_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	base = IOMEM(res->start);
+
+	ulpi_setup(base + 0x170, 1);
+	add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, (unsigned int)base, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id zynq_ehci_dt_ids[] = {
+	{ .compatible = "xlnx,zynq-usb-2.20a" },
+	{ /* sentinel */ }
+};
+
+static struct driver_d zynq_ehci_driver = {
+	.name = "zynq-ehci",
+	.probe = zynq_ehci_probe,
+	.of_compatible = DRV_OF_COMPAT(zynq_ehci_dt_ids),
+};
+device_platform_driver(zynq_ehci_driver);
-- 
2.43.0