[PATCH 1/2] ARM: boards: protonic-imx6: prtvt7: Don't use fixed numbers for dynamic GPIOs

[Sascha Hauer]

On Thu, Mar 27, 2025 at 11:06:34AM +0100, Robin van der Gracht wrote:
> The GPIO indexing differs from the pin indexing.
> 
> Signed-off-by: Robin van der Gracht <robin at protonic.nl>
> ---
>  arch/arm/boards/protonic-imx6/board.c | 32 +++++++++++++++++++++------
>  1 file changed, 25 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
> index 9e62dc1544..4585ca4730 100644
> --- a/arch/arm/boards/protonic-imx6/board.c
> +++ b/arch/arm/boards/protonic-imx6/board.c
> @@ -21,6 +21,7 @@
>  #include <net.h>
>  #include <of_device.h>
>  #include <linux/regmap.h>
> +#include <of_gpio.h>
>  #include <sys/mount.h>
>  #include <sys/stat.h>
>  #include <unistd.h>
> @@ -740,17 +741,34 @@ static int prt_imx6_init_kvg_yaco(struct prt_imx6_priv *priv)
>  	return prt_imx6_init_kvg_power(priv, PW_MODE_KVG_WITH_YACO);
>  }
>  
> -#define GPIO_KEY_F6     (0xe0 + 5)
> -#define GPIO_KEY_CYCLE  (0xe0 + 2)
> -
>  static int prt_imx6_init_prtvt7(struct prt_imx6_priv *priv)
>  {
> -	/* This function relies heavely on the gpio-pca9539 driver */
> +	int gpio_cycle, gpio_f6;
> +	struct device_node *keys, *key;
> +
> +	keys = of_find_compatible_node(NULL, NULL, "gpio-keys");
> +	if (!keys) {
> +		dev_err(priv->dev, "Can't find gpio-keys of node!\n");
> +		return -ENODEV;
> +	}
>  
> -	gpio_direction_input(GPIO_KEY_F6);
> -	gpio_direction_input(GPIO_KEY_CYCLE);
> +	key = of_find_node_by_name(keys, "key-cycle");
> +	gpio_cycle = of_get_named_gpio_flags(key, "gpios", 0, NULL);
> +	if (gpio_cycle < 0) {
> +		dev_err(priv->dev, "Unable to get cycle key gpio\n");
> +		return gpio_cycle;
> +	}
> +	gpio_request_one(gpio_cycle, GPIOF_DIR_IN | GPIOF_ACTIVE_LOW, "Cycle");
> +
> +	key = of_find_node_by_name(keys, "key-f6");
> +	gpio_f6 = of_get_named_gpio_flags(key, "gpios", 0, NULL);
> +	if (gpio_f6 < 0) {
> +		dev_err(priv->dev, "Unable to get F6 key gpio\n");
> +		return gpio_f6;
> +	}
> +	gpio_request_one(gpio_f6, GPIOF_DIR_IN | GPIOF_ACTIVE_LOW, "F6");
>  
> -	if (gpio_get_value(GPIO_KEY_CYCLE) && gpio_get_value(GPIO_KEY_F6))
> +	if (!(gpio_is_active(gpio_cycle) && gpio_is_active(gpio_f6)))
>  		priv->no_usb_check = 1;

Given that you parse the gpio-keys node here, have you thought about
using the gpio-keys driver directly instead?

input_register_notfier() should give you the necessary events when KEY_CYCLEWINDOWS
and KEY_F6 are pressed.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |