[PATCH 2/2] ARM: boards: protonic-imx6: prtvt7: Use autoboot timeout for serial boot

[Robin van der Gracht]

Enabling the autoboot timeout for serial boot makes CI easier.

Signed-off-by: Robin van der Gracht <robin at protonic.nl>
---
 arch/arm/boards/protonic-imx6/board.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
index 4585ca4730..2757ea12b2 100644
--- a/arch/arm/boards/protonic-imx6/board.c
+++ b/arch/arm/boards/protonic-imx6/board.c
@@ -6,6 +6,7 @@
 #include <bbu.h>
 #include <boot.h>
 #include <bootm.h>
+#include <bootsource.h>
 #include <common.h>
 #include <deep-probe.h>
 #include <environment.h>
@@ -768,9 +769,13 @@ static int prt_imx6_init_prtvt7(struct prt_imx6_priv *priv)
 	}
 	gpio_request_one(gpio_f6, GPIOF_DIR_IN | GPIOF_ACTIVE_LOW, "F6");
 
-	if (!(gpio_is_active(gpio_cycle) && gpio_is_active(gpio_f6)))
-		priv->no_usb_check = 1;
+	if (gpio_is_active(gpio_cycle) && gpio_is_active(gpio_f6))
+		return 0;
+
+	if (bootsource_get() == BOOTSOURCE_SERIAL)
+		return 0;
 
+	priv->no_usb_check = 1;
 	return 0;
 }
 
-- 
2.43.0