[PATCH] common: optee: improve documentation of options

[Ahmad Fatoum]

Hi,

On 6/2/25 16:55, Ahmad Fatoum wrote:
> CONFIG_OPTEE_SIZE and CONFIG_OPTEE_SHM_SIZE have a direct correspondence
> to OP-TEE build config options, so point that out in the help text.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
> Cc: Fabian Pflug <fpg at pengutronix.de>
> ---
>  common/Kconfig | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/common/Kconfig b/common/Kconfig
> index fe50da8f3084..12982b45c59d 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -1307,6 +1307,7 @@ config OPTEE_SIZE
>  	  Size to reserve in main memory for OP-TEE.
>  	  Can be larger than the actual size used by OP-TEE, this is used to prevent
>  	  barebox from using or speculating into this area.
> +	  This should be at least as big as CFG_TZDRAM_SIZE in OP-TEE.

This is not completely correct. As OPTEE_SIZE is used as offset from the
end of RAM, this needs to include SHMEM as well. I will revise and
resent a v2.

Cheers,
Ahmad

>  
>  config OPTEE_SHM_SIZE
>  	hex
> @@ -1315,7 +1316,11 @@ config OPTEE_SHM_SIZE
>  	depends on HAVE_OPTEE
>  	help
>  	  Size to reserve in main memory for static OP-TEE shared memory
> -	  communication. Can be used for fixing up the OP-TEE OF node.
> +	  communication. The OP-TEE shared memory starts directly after
> +	  the OPTEE TZDRAM region. It should be chosen to be equivalent
> +	  to CFG_SHMEM_SIZE in OP-TEE.
> +
> +	  This value can be used for fixing up the OP-TEE OF node.
>  
>  	  A shared memory size of 0 means that only dynamic shared memory
>  	  will be supported for communication with OP-TEE. This is the only

-- 
Pengutronix e.K.                  |                             |
Steuerwalder Str. 21              | http://www.pengutronix.de/  |
31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |