[PATCH] common: optee: improve documentation of options

[Ahmad Fatoum]

CONFIG_OPTEE_SIZE and CONFIG_OPTEE_SHM_SIZE have a direct correspondence
to OP-TEE build config options, so point that out in the help text.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
Cc: Fabian Pflug <fpg at pengutronix.de>
---
 common/Kconfig | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/common/Kconfig b/common/Kconfig
index fe50da8f3084..12982b45c59d 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1307,6 +1307,7 @@ config OPTEE_SIZE
 	  Size to reserve in main memory for OP-TEE.
 	  Can be larger than the actual size used by OP-TEE, this is used to prevent
 	  barebox from using or speculating into this area.
+	  This should be at least as big as CFG_TZDRAM_SIZE in OP-TEE.
 
 config OPTEE_SHM_SIZE
 	hex
@@ -1315,7 +1316,11 @@ config OPTEE_SHM_SIZE
 	depends on HAVE_OPTEE
 	help
 	  Size to reserve in main memory for static OP-TEE shared memory
-	  communication. Can be used for fixing up the OP-TEE OF node.
+	  communication. The OP-TEE shared memory starts directly after
+	  the OPTEE TZDRAM region. It should be chosen to be equivalent
+	  to CFG_SHMEM_SIZE in OP-TEE.
+
+	  This value can be used for fixing up the OP-TEE OF node.
 
 	  A shared memory size of 0 means that only dynamic shared memory
 	  will be supported for communication with OP-TEE. This is the only
-- 
2.39.5