[PATCH v2 00/20] ARM: K3 updates

[Sascha Hauer]

This series has some updates for the TI K3 architecture.

We add support for bootstrapping boards via USB DFU. This has been sent
earlier, this time booting from eMMC is added as well.

On K3 SoCs we need a bunch of images after the first stage has been
loaded: OP-TEE, ti-dm firmware, TF-A binary and finally a barebox
binary. Until now these are expected as distinct images on the SD cards
FAT partition. This is impractical for booting from eMMC boot partitions
and also DFU boot, so this series adds support for handling a FIP image
containing these binaries.

Also some misc patches like enabling the 32k crystal needed for accurate
RTC frequency

Sascha

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
Changes in v2:
- Improve existing FIP code and use it instead of open coding parsing the
  FIP image
- add defconfig file for k3-r5
- Cleanup the board entry functions for the K3 Boards
- Link to v1: https://lore.kernel.org/r/20250205-k3-emmc-v1-0-06679246be41@pengutronix.de

---
Sascha Hauer (20):
      ARM: k3: Add function to enable 32k crystal
      ARM: k3: add function to detect eMMC boot
      ARM: k3: do not mount /boot when booting from eMMC
      fip: drop typedefs
      fip: use linux list implementation
      fip: use uuid_equal() and uuid_is_null()
      fiptool: do not typedef structs
      fip: add fip_ prefix
      fip: add fip_image_open()
      ARM: k3: r5: add USB DFU and eMMC boot support
      ARM: am625-sk: enable 32k crystal
      mci: am654: parse generic mmc node properties
      ARM: k3: limit eMMC frequency to 26MHz
      ARM: k3: add eMMC barebox update handler
      ARM: am625-sk: put environment on eMMC when booting from it
      serial: omap: Use ttyS as Linux console name
      ARM: k3: remove beagleplay FIT image
      ARM: am625-sk: cleanup board entry
      ARM: beagleplay: cleanup board entry
      ARM: k3: Add k3-r5_defconfig

 Documentation/boards/ti-k3.rst        |  47 +++++++
 arch/arm/boards/am625-sk/Makefile     |   2 +-
 arch/arm/boards/am625-sk/board.c      |  35 +++++
 arch/arm/boards/am625-sk/entry.S      |  29 ----
 arch/arm/boards/am625-sk/lowlevel.c   |  13 +-
 arch/arm/boards/beagleplay/Makefile   |   1 -
 arch/arm/boards/beagleplay/entry.S    |  29 ----
 arch/arm/boards/beagleplay/lowlevel.c |  18 +--
 arch/arm/configs/k3-r5_defconfig      |  43 ++++++
 arch/arm/dts/k3-am625-beagleplay.dts  |   4 +
 arch/arm/dts/k3-am625-sk.dts          |  19 +++
 arch/arm/mach-k3/Kconfig              |   1 +
 arch/arm/mach-k3/Makefile             |   1 +
 arch/arm/mach-k3/bbu.c                |  77 +++++++++++
 arch/arm/mach-k3/common.c             |  36 +++++
 arch/arm/mach-k3/r5.c                 | 232 +++++++++++++++++++++++++++-----
 commands/fiptool.c                    | 126 +++++++++---------
 drivers/mci/am654-sdhci.c             |   1 +
 drivers/serial/serial_ns16550.c       |   4 +-
 images/Makefile.k3                    |   4 -
 images/k3-am625-beagleplay.its        |  29 ----
 include/fiptool.h                     |  50 ++++---
 include/mach/k3/common.h              |  22 ++++
 lib/fip.c                             | 242 ++++++++++++++++++++++++++--------
 24 files changed, 781 insertions(+), 284 deletions(-)
---
base-commit: ac5af75a4067dd3f795ca982c3edeb75012f7a98
change-id: 20250205-k3-emmc-eaa3df9f3ffd

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>