[PATCH] ARM: i.MX93: allow board code to configure the bl33 loadaddr

[Sascha Hauer]

On Tue, 28 Jan 2025 16:22:11 +0100, Michael Grzeschik wrote:
> Add parameterized __imx93_load_and_start_image_via_tfa function to
> load_and_start the image on arbitrary load addresses. This should be
> taken with caution since it requires to configure the TF-A correctly as
> well, therefore the function is prefixt with '__'.
> 
> One use case of the new helper is to place OP-TEE at the very beginning
> of the DRAM and barebox afterwards.
> 
> [...]

Applied, thanks!

[1/1] ARM: i.MX93: allow board code to configure the bl33 loadaddr
      https://git.pengutronix.de/cgit/barebox/commit/?id=93788c1b4d41 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>