[PATCH] ARM: dts: tqma93xx add dummy supply to regulator

[Sascha Hauer]

On Thu, 17 Apr 2025 10:47:23 +0200, Fabian Pflug wrote:
> The regulator for the usdhc2 references the BUCK4 as its input.
> The BUCK4 is part of the pca9451, which in turn is not a regulator
> in barebox, so there is a problem during initialisation:
> 
> WARNING: imx-esdhc 42860000.mmc at 42860000.of: Failed to get 'vmmc' regulator (ignored)
> 
> Since the dependency could not be resolved, the reg_usdhc2_vmmc
> regulator is not correctly initialized, leaving the gpio in a floating
> state, which results in the GPIO being low, which in turn disables
> the SD-Card.
> 
> [...]

Applied, thanks!

[1/1] ARM: dts: tqma93xx add dummy supply to regulator
      https://git.pengutronix.de/cgit/barebox/commit/?id=a947d07bcdd2 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>