[PATCH] ARM: dts: tqma93xx add dummy supply to regulator

[Ahmad Fatoum]

On 4/17/25 10:47, Fabian Pflug wrote:
> The regulator for the usdhc2 references the BUCK4 as its input.
> The BUCK4 is part of the pca9451, which in turn is not a regulator
> in barebox, so there is a problem during initialisation:
> 
> WARNING: imx-esdhc 42860000.mmc at 42860000.of: Failed to get 'vmmc' regulator (ignored)
> 
> Since the dependency could not be resolved, the reg_usdhc2_vmmc
> regulator is not correctly initialized, leaving the gpio in a floating
> state, which results in the GPIO being low, which in turn disables
> the SD-Card.
> 
> Signed-off-by: Fabian Pflug <f.pflug at pengutronix.de>

Reviewed-by: Ahmad Fatoum <a.fatoum at pengutronix.de>

Thanks,
Ahmad

> ---
>  arch/arm/dts/imx93-tqma93xx.dtsi | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm/dts/imx93-tqma93xx.dtsi b/arch/arm/dts/imx93-tqma93xx.dtsi
> index 40425e39a7..aafeadc275 100644
> --- a/arch/arm/dts/imx93-tqma93xx.dtsi
> +++ b/arch/arm/dts/imx93-tqma93xx.dtsi
> @@ -15,6 +15,9 @@ pca9451a: pmic at 25 {
>  		reg = <0x25>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_pca9451>;
> +		regulators {
> +			barebox,allow-dummy-supply;
> +		};
>  	};
>  };
>  

-- 
Pengutronix e.K.                  |                             |
Steuerwalder Str. 21              | http://www.pengutronix.de/  |
31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |