[PATCH] test: arm: qemu-sabrelite: Use qemu specific device tree

[Sascha Hauer]

On Tue, 01 Oct 2024 10:52:08 +0200, Sascha Hauer wrote:
> The sabrelite board has some GPIOs registered as buttons. These GPIOs
> are not properly emulated in QEMU and read as low. The buttons are
> active low as well, so in barebox we detect all buttons as pressed. One
> of these buttons is registered as KEY_POWER. Depending on the
> initialization order it can happen that barebox tries to power down the
> board during startup. Avoid this pitfall by passing a device tree to
> QEMU which has the gpio-keys driver disabled.
> 
> [...]

Applied, thanks!

[1/1] test: arm: qemu-sabrelite: Use qemu specific device tree
      https://git.pengutronix.de/cgit/barebox/commit/?id=38dbe309f536 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>