[PATCH] test: arm: qemu-sabrelite: Use qemu specific device tree

[Sascha Hauer]

The sabrelite board has some GPIOs registered as buttons. These GPIOs
are not properly emulated in QEMU and read as low. The buttons are
active low as well, so in barebox we detect all buttons as pressed. One
of these buttons is registered as KEY_POWER. Depending on the
initialization order it can happen that barebox tries to power down the
board during startup. Avoid this pitfall by passing a device tree to
QEMU which has the gpio-keys driver disabled.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/dts/Makefile                           | 2 +-
 arch/arm/dts/imx6q-sabrelite-qemu.dts           | 5 +++++
 test/arm/qemu-sabrelite at multi_v7_defconfig.yaml | 2 +-
 3 files changed, 7 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/dts/imx6q-sabrelite-qemu.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 68585e1e4b..3b3236b416 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -127,7 +127,7 @@ lwl-$(CONFIG_MACH_RPI2) += bcm2836-rpi-2.dtb.o
 lwl-$(CONFIG_MACH_RPI3) += bcm2837-rpi-3.dtb.o
 lwl-$(CONFIG_MACH_RPI_CM3) += bcm2837-rpi-cm3.dtb.o
 lwl-$(CONFIG_MACH_RPI4) += bcm2711-rpi-4.dtb.o bcm2711-rpi-400.dtb.o bcm2711-rpi-cm4-io.dtb.o bcm2711-rpi-cm4s-io.dtb.o
-lwl-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
+lwl-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o imx6q-sabrelite-qemu.dtb.o
 lwl-$(CONFIG_MACH_SABRESD) += imx6q-sabresd.dtb.o imx6qp-sabresd.dtb.o imx6dl-sabresd.dtb.o
 lwl-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += imx6sx-sdb.dtb.o
 lwl-$(CONFIG_MACH_SOCFPGA_ALTERA_SOCDK) += socfpga_cyclone5_socdk.dtb.o
diff --git a/arch/arm/dts/imx6q-sabrelite-qemu.dts b/arch/arm/dts/imx6q-sabrelite-qemu.dts
new file mode 100644
index 0000000000..a16a882543
--- /dev/null
+++ b/arch/arm/dts/imx6q-sabrelite-qemu.dts
@@ -0,0 +1,5 @@
+#include "imx6q-sabrelite.dts"
+
+&{/gpio-keys} {
+	status = "disabled";
+};
diff --git a/test/arm/qemu-sabrelite at multi_v7_defconfig.yaml b/test/arm/qemu-sabrelite at multi_v7_defconfig.yaml
index 77b7f9e589..8dc137ee44 100644
--- a/test/arm/qemu-sabrelite at multi_v7_defconfig.yaml
+++ b/test/arm/qemu-sabrelite at multi_v7_defconfig.yaml
@@ -15,6 +15,6 @@ targets:
       BareboxTestStrategy: {}
 images:
   barebox-dt-2nd.img: !template "$LG_BUILDDIR/images/barebox-dt-2nd.img"
-  imx6q-sabreliste.dtb: !template "$LG_BUILDDIR/arch/arm/dts/imx6q-sabrelite.dtb"
+  imx6q-sabreliste.dtb: !template "$LG_BUILDDIR/arch/arm/dts/imx6q-sabrelite-qemu.dtb"
 imports:
   -  ../strategy.py
-- 
2.39.5