[PATCH 0/7] ARM: K3: add AM625 ethernet support

[Sascha Hauer]

On Fri, 08 Nov 2024 14:14:58 +0100, Sascha Hauer wrote:
> This series adds ethernet support for TI K3 SoCs. The driver has been
> tested on the TI AM625 based Beagleplay board. The driver needs an
> external DMA engine and also some TI specific units, so this series is
> longer than it should be for just an ethernet driver.
> 
> 

Applied, thanks!

[1/7] net: davinci_mdio: separate driver
      https://git.pengutronix.de/cgit/barebox/commit/?id=b32a92fd714a (link may not be stable)
[2/7] firmware: ti_sci: update from U-Boot
      https://git.pengutronix.de/cgit/barebox/commit/?id=d355335adb75 (link may not be stable)
[3/7] ARM: K3: add navss-ringacc driver
      https://git.pengutronix.de/cgit/barebox/commit/?id=0ae0d8b12b1c (link may not be stable)
[4/7] dma: add dma-devices support
      https://git.pengutronix.de/cgit/barebox/commit/?id=f4b9411a0b97 (link may not be stable)
[5/7] dma-devices: add k3-udma support
      https://git.pengutronix.de/cgit/barebox/commit/?id=4cc7c7658297 (link may not be stable)
[6/7] ARM: k3: am625: add syscon compatible to phy_gmii_sel
      https://git.pengutronix.de/cgit/barebox/commit/?id=74dda1b25c23 (link may not be stable)
[7/7] net: add am65-cpsw-nuss driver
      https://git.pengutronix.de/cgit/barebox/commit/?id=89ad0c51b24d (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>