[PATCH 1/3] net: dsa: ksz9477: always toggle reset gpio if available

Sascha Hauer s.hauer at pengutronix.de
Thu May 2 23:50:43 PDT 2024


On Thu, 02 May 2024 17:17:55 +0200, Ahmad Fatoum wrote:
> The barebox driver currently only ensures that the switch is out of
> reset, but doesn't actually trigger a reset pulse.
> 
> The Linux driver, on the other hand, holds reset active for 10ms and
> then waits a whopping 100ms after reset deassertion.
> 
> This seems excessive by a thousandfold for at least KSZ9893R[1], whose
> datasheet states:
> 
> [...]

Applied, thanks!

[1/3] net: dsa: ksz9477: always toggle reset gpio if available
      https://git.pengutronix.de/cgit/barebox/commit/?id=372d21e79e30 (link may not be stable)
[2/3] net: dsa: ksz9477: report 0 as value when returning error
      https://git.pengutronix.de/cgit/barebox/commit/?id=6d42b2827243 (link may not be stable)
[3/3] net: dsa: ksz9477: return negative error codes on PHY access failures
      https://git.pengutronix.de/cgit/barebox/commit/?id=eefd990b4cfd (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>




More information about the barebox mailing list