[PATCH 01/18] ARM: i.MX8M: atf: make use of imx8m*_save_bootrom_log macros

[Marco Felsch]

On 24-01-11, Ahmad Fatoum wrote:
> On 11.01.24 12:48, Marco Felsch wrote:
> >  	if (IS_ENABLED(CONFIG_FIRMWARE_IMX8MN_OPTEE)) {
> > @@ -305,9 +305,9 @@ __noreturn void imx8mq_load_and_start_image_via_tfa(void)
> >  	const void *bl31;
> >  	size_t bl31_size;
> >  	void *bl33 = (void *)MX8M_ATF_BL33_BASE_ADDR;
> > -	unsigned long endmem = MX8M_DDR_CSD1_BASE_ADDR + imx8m_barebox_earlymem_size(16);
> > +	unsigned long endmem = MX8M_DDR_CSD1_BASE_ADDR + imx8m_barebox_earlymem_size(32);
> 
> Why this change?

Because the ddr-bandwidth for i.MX8MQ is 32-bit and the usage of
imx8mq_save_bootrom_log() will fix this as well.

Regards,
  Marco

> 
> >  
> > -	imx8m_save_bootrom_log((void *)arm_mem_scratch(endmem));
> > +	imx8mq_save_bootrom_log();
> >  	imx8mq_load_bl33(bl33);
> >  
> >  	if (IS_ENABLED(CONFIG_FIRMWARE_IMX8MQ_OPTEE)) {
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
>