[PATCH] ARM: i.MX8MM: innocomm-wb15: switch to upstream DT
Ahmad Fatoum
a.fatoum at pengutronix.de
Tue Feb 20 04:32:15 PST 2024
The same DTs we have in barebox have made it upstream with very minor
differences, so drop the copies inside barebox.
No functional change intended.
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
.../dts/imx8mm-innocomm-wb15-evk-upstream.dts | 147 ------
arch/arm/dts/imx8mm-innocomm-wb15-evk.dts | 2 +-
arch/arm/dts/imx8mm-innocomm-wb15.dtsi | 481 ------------------
3 files changed, 1 insertion(+), 629 deletions(-)
delete mode 100644 arch/arm/dts/imx8mm-innocomm-wb15-evk-upstream.dts
delete mode 100644 arch/arm/dts/imx8mm-innocomm-wb15.dtsi
diff --git a/arch/arm/dts/imx8mm-innocomm-wb15-evk-upstream.dts b/arch/arm/dts/imx8mm-innocomm-wb15-evk-upstream.dts
deleted file mode 100644
index 0a28e7ceabbe..000000000000
--- a/arch/arm/dts/imx8mm-innocomm-wb15-evk-upstream.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018 Bang & Olufsen
- * Copyright 2022 Pengutronix
- */
-
-/dts-v1/;
-
-#include "imx8mm-innocomm-wb15.dtsi"
-
-/ {
- model = "InnoComm WB15-EVK";
- compatible = "innocomm,wb15-evk", "fsl,imx8mm";
-
- chosen {
- stdout-path = &uart2;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_leds>;
- status = "okay";
-
- led-0 {
- label = "debug";
- gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- reg_vsd_3v3: regulator-vsd-3v3 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
- regulator-name = "VSD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_ethphy: regulator-eth-phy {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_phy_reg>;
- regulator-name = "PHY_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy at 1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_phy>;
- reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- phy-supply = <®_ethphy>;
- };
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usbotg1 {
- dr_mode = "otg";
- samsung,picophy-pre-emp-curr-control = <3>;
- samsung,picophy-dc-vol-level-adjust = <7>;
- disable-over-current;
- status = "okay";
-};
-
-&usbotg2 {
- dr_mode = "host";
- samsung,picophy-pre-emp-curr-control = <3>;
- samsung,picophy-dc-vol-level-adjust = <7>;
- disable-over-current;
- status = "okay";
-};
-
-&usdhc2 {
- cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- vmmc-supply = <®_vsd_3v3>;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x03
- MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x03
- MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
- MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
- MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
- MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
- MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
- MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
- MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
- MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
- MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
- MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
- MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
- MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
- >;
- };
-
- pinctrl_fec_phy: fecphygrp {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
- >;
- };
-
- pinctrl_fec_phy_reg: fecphyreggrp {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x16
- >;
- };
-
- pinctrl_gpio_leds: led_grp {
- fsl,pins = <
- MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0xd6
- >;
- };
-
- pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
- >;
- };
-};
diff --git a/arch/arm/dts/imx8mm-innocomm-wb15-evk.dts b/arch/arm/dts/imx8mm-innocomm-wb15-evk.dts
index 907d9c96baa6..ac7e5a1cb193 100644
--- a/arch/arm/dts/imx8mm-innocomm-wb15-evk.dts
+++ b/arch/arm/dts/imx8mm-innocomm-wb15-evk.dts
@@ -2,7 +2,7 @@
/dts-v1/;
-#include "imx8mm-innocomm-wb15-evk-upstream.dts"
+#include <arm64/freescale/imx8mm-innocomm-wb15-evk.dts>
/ {
chosen {
diff --git a/arch/arm/dts/imx8mm-innocomm-wb15.dtsi b/arch/arm/dts/imx8mm-innocomm-wb15.dtsi
deleted file mode 100644
index 7e25450362c4..000000000000
--- a/arch/arm/dts/imx8mm-innocomm-wb15.dtsi
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018 Bang & Olufsen
- */
-
-#include <arm64/freescale/imx8mm.dtsi>
-#include "imx8mm.dtsi"
-#include <dt-bindings/phy/phy-imx8-pcie.h>
-
-/ {
- reg_modem: regulator-modem {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_modem_regulator>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "epdev_on";
- gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- reg_3v3_out: regulator-3v3-out {
- compatible = "regulator-fixed";
- regulator-name = "3V3_OUT";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-};
-
-&cpu_alert0 {
- temperature = <95000>;
-};
-
-&cpu_crit0 {
- temperature = <105000>;
-};
-
-&ddrc {
- operating-points-v2 = <&ddrc_opp_table>;
-
- ddrc_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-25000000 {
- opp-hz = /bits/ 64 <25000000>;
- };
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- };
-
- opp-600000000 {
- opp-hz = /bits/ 64 <600000000>;
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- status = "okay";
-
- pmic at 4b {
- compatible = "rohm,bd71847";
- reg = <0x4b>;
- pinctrl-0 = <&pinctrl_pmic>;
- interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
- rohm,reset-snvs-powered;
-
- regulators {
- buck1_reg: BUCK1 {
- regulator-name = "buck1";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <1250>;
- rohm,dvs-run-voltage = <850000>;
- rohm,dvs-idle-voltage = <850000>;
- rohm,dvs-suspend-voltage = <850000>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "buck2";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <1250>;
- rohm,dvs-run-voltage = <1000000>;
- rohm,dvs-idle-voltage = <900000>;
- };
-
- buck3_reg: BUCK3 {
- // buck5 in datasheet
- regulator-name = "buck3";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1350000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck4_reg: BUCK4 {
- // buck6 in datasheet
- regulator-name = "buck4";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck5_reg: BUCK5 {
- // buck7 in datasheet
- regulator-name = "buck5";
- regulator-min-microvolt = <1605000>;
- regulator-max-microvolt = <1995000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck6_reg: BUCK6 {
- // buck8 in datasheet
- regulator-name = "buck6";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1_reg: LDO1 {
- regulator-name = "ldo1";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "ldo2";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <900000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "ldo3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "ldo4";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "ldo5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "ldo6";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c2>;
- pinctrl-1 = <&pinctrl_i2c2_gpio>;
- scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- status = "okay";
-};
-
-&i2c3 {
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c3>;
- pinctrl-1 = <&pinctrl_i2c3_gpio>;
- scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&pcie_phy {
- fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
- fsl,tx-deemph-gen1 = <0x2d>;
- fsl,tx-deemph-gen2 = <0xf>;
- status = "okay";
-};
-
-&pcie0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie0>;
- reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
- clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_PHY>,
- <&clk IMX8MM_CLK_PCIE1_AUX>;
- clock-names = "pcie", "pcie_bus", "pcie_aux";
- fsl,max-link-speed = <1>;
- assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>;
- assigned-clock-rates = <10000000>, <250000000>;
- assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>;
- status = "okay";
-};
-
-&uart1 { /* BT */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- assigned-clocks = <&clk IMX8MM_CLK_UART1>;
- assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
- fsl,uart-has-rtscts;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm4349-bt";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_modem_bt>;
- device-wakeup-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
- vbat-supply = <®_3v3_out>;
- vddio-supply = <®_3v3_out>;
- clocks = <&osc_32k>;
- max-speed = <3000000>;
- clock-names = "extclk";
- };
-};
-
-&uart2 { /* console */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
-};
-
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- bus-width = <8>;
- no-sd;
- no-sdio;
- non-removable;
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
- bus-width = <4>;
-};
-
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
- status = "okay";
-};
-
-&A53_0 {
- cpu-supply = <&buck2_reg>;
-};
-
-&A53_1 {
- cpu-supply = <&buck2_reg>;
-};
-
-&A53_2 {
- cpu-supply = <&buck2_reg>;
-};
-
-&A53_3 {
- cpu-supply = <&buck2_reg>;
-};
-
-/delete-node/ &sec_jr1; /* Job ring in use by OP-TEE */
-
-&iomuxc {
- pinctrl_i2c1: i2c1-grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
- MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
- >;
- };
-
- pinctrl_i2c1_gpio: i2c1-gpio-grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c3
- MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c3
- >;
- };
-
- pinctrl_i2c2: i2c2-grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
- MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
- >;
- };
-
- pinctrl_i2c2_gpio: i2c2-gpio-grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001c3
- MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001c3
- >;
- };
-
- pinctrl_i2c3: i2c3-grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
- MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
- >;
- };
-
- pinctrl_i2c3_gpio: i2c3-gpio-grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001c3
- MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001c3
- >;
- };
-
- pinctrl_pcie0: pcie0-grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x61
- MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x6
- >;
- };
-
- pinctrl_modem_bt: modembt-grp {
- fsl,pins = <
- MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x19
- MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x19
- MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19
- MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19
- MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141
- >;
- };
-
- pinctrl_modem_regulator: modemreg-grp {
- fsl,pins = <
- MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x41
- >;
- };
-
- pinctrl_pmic: pmicirq-grp {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
- >;
- };
-
- pinctrl_uart1: uart1-grp {
- fsl,pins = <
- MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
- MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
- MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140
- MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140
- >;
- };
-
- pinctrl_uart2: uart2-grp {
- fsl,pins = <
- MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
- MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
- >;
- };
-
- pinctrl_usdhc1: usdhc1-grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000190
- MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
- MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
- MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
- MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
- MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
- MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0
- MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0
- MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0
- MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0
- MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190
- MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d0
- >;
- };
-
- pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000194
- MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
- MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
- MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
- MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
- MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
- MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4
- MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4
- MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4
- MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4
- MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194
- MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d4
- >;
- };
-
- pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000196
- MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
- MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
- MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
- MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
- MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
- MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6
- MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6
- MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6
- MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6
- MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196
- MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d6
- >;
- };
-
- pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x1d0
- >;
- };
-
- pinctrl_usdhc2: usdhc2-grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
- MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
- MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
- MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
- MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
- MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
- >;
- };
-
- pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
- MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
- MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
- MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
- MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
- MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
- >;
- };
-
- pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
- MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
- MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
- MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
- MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
- MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
- >;
- };
-
- pinctrl_wdog: wdog-grp {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
- >;
- };
-};
--
2.39.2
More information about the barebox
mailing list