[PATCH master] aiodev: imx_thermal: fix breakage after device tree sync

[Ahmad Fatoum]

On 11.09.23 14:35, Marco Felsch wrote:
> On 23-09-11, Ahmad Fatoum wrote:
>> fsl,tempmon-data is a deprecated property that has been replaced
>> upstream by a NVMEM cell pointing at the calibration value and so
>> made it into barebox breaking the driver.
>>
>> Switch to using the new property to fix the regression.
> 
> The Linux driver code can handle the deprecated binding still, in case
> of old DTBs. Since the DTBS are builtin to barebox updating the DTB
> without the barebox binary make no sense. Anyway, do we need to take the
> deprecated binding into account as well like Linux does?

For this reason, only the new binding is implemented.

> 
> Regards,
>   Marco
> 
>> Fixes: abef60363d8e ("dts: update to v5.8-rc1")
>> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
>> ---
>>  drivers/aiodev/imx_thermal.c | 25 ++++---------------------
>>  1 file changed, 4 insertions(+), 21 deletions(-)
>>
>> diff --git a/drivers/aiodev/imx_thermal.c b/drivers/aiodev/imx_thermal.c
>> index 3263519cb241..2693ad05e0e5 100644
>> --- a/drivers/aiodev/imx_thermal.c
>> +++ b/drivers/aiodev/imx_thermal.c
>> @@ -22,6 +22,7 @@
>>  #include <linux/math64.h>
>>  #include <linux/log2.h>
>>  #include <linux/clk.h>
>> +#include <linux/nvmem-consumer.h>
>>  #include <mach/imx/imx6-anadig.h>
>>  #include <io.h>
>>  #include <aiodev.h>
>> @@ -29,7 +30,6 @@
>>  
>>  #define FACTOR0			10000000
>>  #define MEASURE_FREQ		327
>> -#define OCOTP_ANA1_OFFSET      (0xE * sizeof(uint32_t))
>>  
>>  struct imx_thermal_data {
>>  	int c1, c2;
>> @@ -109,30 +109,13 @@ static int imx_thermal_read(struct aiochannel *chan, int *val)
>>  static int imx_thermal_probe(struct device *dev)
>>  {
>>  	uint32_t ocotp_ana1;
>> -	struct device_node *node;
>>  	struct imx_thermal_data *imx_thermal;
>> -	struct cdev *ocotp;
>>  	int t1, n1, t2, n2;
>>  	int ret;
>>  
>> -	node = of_parse_phandle(dev->of_node, "fsl,tempmon-data", 0);
>> -	if (!node) {
>> -		dev_err(dev, "No calibration data source\n");
>> -		return -ENODEV;
>> -	}
>> -
>> -	ocotp = cdev_by_device_node(node);
>> -	if (!ocotp) {
>> -		dev_err(dev, "No OCOTP character device\n");
>> -		return -ENODEV;
>> -	}
>> -
>> -	ret = cdev_read(ocotp, &ocotp_ana1, sizeof(ocotp_ana1),
>> -			OCOTP_ANA1_OFFSET, 0);
>> -	if (ret != sizeof(ocotp_ana1)) {
>> -		dev_err(dev, "Failed to read calibration data\n");
>> -		return ret < 0 ? ret : -EIO;
>> -	}
>> +	ret = nvmem_cell_read_variable_le_u32(dev, "calib", &ocotp_ana1);
>> +	if (ret)
>> +		return ret;
>>  
>>  	imx_thermal = xzalloc(sizeof(*imx_thermal));
>>  	imx_thermal->base = syscon_base_lookup_by_phandle(dev->of_node,
>> -- 
>> 2.39.2
>>
>>
>>
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |