[PATCH master] aiodev: imx_thermal: fix breakage after device tree sync

[Marco Felsch]

On 23-09-11, Ahmad Fatoum wrote:
> fsl,tempmon-data is a deprecated property that has been replaced
> upstream by a NVMEM cell pointing at the calibration value and so
> made it into barebox breaking the driver.
> 
> Switch to using the new property to fix the regression.

The Linux driver code can handle the deprecated binding still, in case
of old DTBs. Since the DTBS are builtin to barebox updating the DTB
without the barebox binary make no sense. Anyway, do we need to take the
deprecated binding into account as well like Linux does?

Regards,
  Marco

> Fixes: abef60363d8e ("dts: update to v5.8-rc1")
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
>  drivers/aiodev/imx_thermal.c | 25 ++++---------------------
>  1 file changed, 4 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/aiodev/imx_thermal.c b/drivers/aiodev/imx_thermal.c
> index 3263519cb241..2693ad05e0e5 100644
> --- a/drivers/aiodev/imx_thermal.c
> +++ b/drivers/aiodev/imx_thermal.c
> @@ -22,6 +22,7 @@
>  #include <linux/math64.h>
>  #include <linux/log2.h>
>  #include <linux/clk.h>
> +#include <linux/nvmem-consumer.h>
>  #include <mach/imx/imx6-anadig.h>
>  #include <io.h>
>  #include <aiodev.h>
> @@ -29,7 +30,6 @@
>  
>  #define FACTOR0			10000000
>  #define MEASURE_FREQ		327
> -#define OCOTP_ANA1_OFFSET      (0xE * sizeof(uint32_t))
>  
>  struct imx_thermal_data {
>  	int c1, c2;
> @@ -109,30 +109,13 @@ static int imx_thermal_read(struct aiochannel *chan, int *val)
>  static int imx_thermal_probe(struct device *dev)
>  {
>  	uint32_t ocotp_ana1;
> -	struct device_node *node;
>  	struct imx_thermal_data *imx_thermal;
> -	struct cdev *ocotp;
>  	int t1, n1, t2, n2;
>  	int ret;
>  
> -	node = of_parse_phandle(dev->of_node, "fsl,tempmon-data", 0);
> -	if (!node) {
> -		dev_err(dev, "No calibration data source\n");
> -		return -ENODEV;
> -	}
> -
> -	ocotp = cdev_by_device_node(node);
> -	if (!ocotp) {
> -		dev_err(dev, "No OCOTP character device\n");
> -		return -ENODEV;
> -	}
> -
> -	ret = cdev_read(ocotp, &ocotp_ana1, sizeof(ocotp_ana1),
> -			OCOTP_ANA1_OFFSET, 0);
> -	if (ret != sizeof(ocotp_ana1)) {
> -		dev_err(dev, "Failed to read calibration data\n");
> -		return ret < 0 ? ret : -EIO;
> -	}
> +	ret = nvmem_cell_read_variable_le_u32(dev, "calib", &ocotp_ana1);
> +	if (ret)
> +		return ret;
>  
>  	imx_thermal = xzalloc(sizeof(*imx_thermal));
>  	imx_thermal->base = syscon_base_lookup_by_phandle(dev->of_node,
> -- 
> 2.39.2
> 
> 
>