[PATCH 1/2] ARM: boards: polyhex-debix: enable HAB support

[Marco Felsch]

On 23-12-20, Ahmad Fatoum wrote:
> Hello Marco,
> 
> On 20.12.23 15:54, Marco Felsch wrote:
> > From: Rouven Czerwinski <r.czerwinski at pengutronix.de>
> > 
> > Include the gencsf header to enable the secure-boot images.
> > 
> > Signed-off-by: Rouven Czerwinski <r.czerwinski at pengutronix.de>
> 
> Any downside in just doing this for all i.MX8M boards?

Thought about this too. If HABV4 is not enabled this will have no
impact. I didn't added the support for all boards since some custom
boards may don't want this. What about adding it to all EVK boards?

Regards,
  Marco

> Thanks,
> Ahmad
> 
> > ---
> >  arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg b/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg
> > index 663bd102e9a2..d619995496ac 100644
> > --- a/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg
> > +++ b/arch/arm/boards/polyhex-debix/flash-header-polyhex-debix.imxcfg
> > @@ -5,3 +5,4 @@ soc imx8mp
> >  loadaddr 0x920000
> >  max_load_size 0x3f000
> >  ivtofs 0x0
> > +#include <mach/imx/habv4-imx8-gencsf.h>
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
>