[PATCH v2 2/5] usb: xhci: pass physical device to DMA API
Ahmad Fatoum
a.fatoum at pengutronix.de
Fri Apr 14 07:52:56 PDT 2023
The xHCI device is just a child of the DWC3 with no DT node assigned.
As such, it lacks all DMA settings that may be set in the DT.
Fix this by using the hardware device instead in case the xHCI lacks
its own DT node.
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
drivers/usb/host/xhci-ring.c | 8 ++++----
drivers/usb/host/xhci.c | 6 +++++-
2 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 4654ab14862f..995772f92722 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -594,7 +594,7 @@ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe,
memcpy(bounce, buffer, length);
}
- map = addr = dma_map_single(ctrl->dev, bounce, length, direction);
+ map = addr = dma_map_single(ctrl->host.hw_dev, bounce, length, direction);
dev_dbg(&udev->dev, "pipe=0x%lx, buffer=%p, length=%d\n",
pipe, buffer, length);
@@ -740,7 +740,7 @@ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe,
record_transfer_result(udev, event, length);
xhci_acknowledge_event(ctrl);
- dma_unmap_single(ctrl->dev, map, length, direction);
+ dma_unmap_single(ctrl->host.hw_dev, map, length, direction);
if (usb_pipein(pipe))
memcpy(buffer, bounce, length);
@@ -895,7 +895,7 @@ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
if (length > 0) {
if (req->requesttype & USB_DIR_IN)
field |= TRB_DIR_IN;
- map = buf_64 = dma_map_single(ctrl->dev, buffer, length, direction);
+ map = buf_64 = dma_map_single(ctrl->host.hw_dev, buffer, length, direction);
trb_fields[0] = lower_32_bits(buf_64);
trb_fields[1] = upper_32_bits(buf_64);
@@ -947,7 +947,7 @@ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
/* Invalidate buffer to make it available to usb-core */
if (length > 0)
- dma_unmap_single(ctrl->dev, map, length, direction);
+ dma_unmap_single(ctrl->host.hw_dev, map, length, direction);
if (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))
== COMP_SHORT_TX) {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f5cc6dac57d8..f149e784524d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1359,7 +1359,11 @@ int xhci_register(struct xhci_ctrl *ctrl)
*/
host->no_desc_before_addr = true;
- host->hw_dev = dev;
+ /*
+ * If xHCI doesn't have its own DT node, it'll be a child of a
+ * physical USB host controller device that should be used for DMA
+ */
+ host->hw_dev = dev_of_node(dev) ? dev : dev->parent;
host->submit_int_msg = xhci_submit_int_msg;
host->submit_control_msg = xhci_submit_control_msg;
host->submit_bulk_msg = xhci_submit_bulk_msg;
--
2.39.2
More information about the barebox
mailing list