[PATCH] ARM: boards: protonic-imx6: fix bbu_handler device paths
Sascha Hauer
sha at pengutronix.de
Tue Apr 4 00:05:32 PDT 2023
On Mon, Apr 03, 2023 at 02:25:09PM +0200, Marco Felsch wrote:
> The update handler path must be a full-path starting at '/'. Fix this by
> adding the '/dev/' path prefix.
>
> Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
> ---
> arch/arm/boards/protonic-imx6/board.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
> index d2fb25d3cc..0d57f409d2 100644
> --- a/arch/arm/boards/protonic-imx6/board.c
> +++ b/arch/arm/boards/protonic-imx6/board.c
> @@ -530,7 +530,7 @@ static int prt_imx6_bbu(struct prt_imx6_priv *priv)
> emmc_flags = BBU_HANDLER_FLAG_DEFAULT;
> }
>
> - devicefile = basprintf("mmc%d", dcfg->emmc_usdhc);
> + devicefile = basprintf("/dev/mmc%d", dcfg->emmc_usdhc);
> if (!devicefile) {
> ret = -ENOMEM;
> goto exit_bbu;
> @@ -540,7 +540,7 @@ static int prt_imx6_bbu(struct prt_imx6_priv *priv)
> if (ret)
> goto exit_bbu;
>
> - devicefile = basprintf("mmc%d", dcfg->sd_usdhc);
> + devicefile = basprintf("/dev/mmc%d", dcfg->sd_usdhc);
> if (!devicefile) {
> ret = -ENOMEM;
> goto exit_bbu;
> --
> 2.39.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list