[PATCH v2 2/6] net: dsa: enable promiscuous mode for switch master edev

[Ahmad Fatoum]

Hello Oleksij,

On 04.11.22 09:26, Sascha Hauer wrote:
> On Thu, Nov 03, 2022 at 02:13:47PM +0100, Oleksij Rempel wrote:
>> Typical use case for DSA framework on barebox a port multiplexer. This
>> means, we mostly have different MAC addresses on each port. To make this
>> work, we need to enable promiscuous mode on the master Ethernet
>> controller.
>>
>> With this patch, promiscuous mode will be enabled automatically, as soon
>> as at least one switch port is enabled and this mode will be disabled
>> after all switch ports are disabled as well.
>>
>> Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
>> ---
>>  drivers/net/dsa.c | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/net/dsa.c b/drivers/net/dsa.c
>> index 040ba897e2..14ef8f4c4f 100644
>> --- a/drivers/net/dsa.c
>> +++ b/drivers/net/dsa.c
>> @@ -129,6 +129,7 @@ static int dsa_port_start(struct eth_device *edev)
>>  				return ret;
>>  		}
>>  
>> +		eth_set_promiscuous_mode(ds->edev_master, true);
>>  		eth_open(ds->edev_master);
>>  	}
>>  
>> @@ -160,6 +161,7 @@ static void dsa_port_stop(struct eth_device *edev)
>>  			ops->port_disable(dpc, ds->cpu_port,
>>  					ds->cpu_port_fixed_phy);
>>  
>> +		eth_set_promiscuous_mode(ds->edev_master, false);

Can you change the name to eth_set_promisc[_mode] ?
This aligns it with the kernel IFF_PROMISC and it's easier to type
without looking up correct spelling ^^'.

> 
> Please check the error code. When eth_set_promiscuous_mode() is not
> implemented for the current ethernet device we should notice the user.
> 
> Sascha
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |