[PATCH 10/14] imx-bbu-nand-fcb: Fix reading FCB information from BCH registers

[Sascha Hauer]

fcb->EccBlock0Size and fcb->EccBlock0EccType must be extracted from
the BCH_FLASH0LAYOUT0 register, not from the BCH_FLASH0LAYOUT1 register.

As we always use the same ECC block size for both the first and the
subsequent blocks there's no functional change in this patch, it's only
for consistency.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 common/imx-bbu-nand-fcb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/common/imx-bbu-nand-fcb.c b/common/imx-bbu-nand-fcb.c
index 63c81e4ed6..05bee912e4 100644
--- a/common/imx-bbu-nand-fcb.c
+++ b/common/imx-bbu-nand-fcb.c
@@ -1572,10 +1572,10 @@ static void imx7_fcb_create(struct imx_nand_fcb_bbu_handler *imx_handler,
 	fl0 = readl(bch_regs + BCH_FLASH0LAYOUT0);
 	fcb->MetadataBytes = BF_VAL(fl0, BCH_FLASHLAYOUT0_META_SIZE);
 	fcb->NumEccBlocksPerPage = BF_VAL(fl0, BCH_FLASHLAYOUT0_NBLOCKS);
+	fcb->EccBlock0Size = 4 * BF_VAL(fl0, BCH_FLASHLAYOUT0_DATA0_SIZE);
+	fcb->EccBlock0EccType = BF_VAL(fl0, BCH_FLASHLAYOUT0_ECC0);
 
 	fl1 = readl(bch_regs + BCH_FLASH0LAYOUT1);
-	fcb->EccBlock0Size = 4 * BF_VAL(fl1, BCH_FLASHLAYOUT0_DATA0_SIZE);
-	fcb->EccBlock0EccType = BF_VAL(fl1, BCH_FLASHLAYOUT0_ECC0);
 	fcb->EccBlockNSize = 4 * BF_VAL(fl1, BCH_FLASHLAYOUT1_DATAN_SIZE);
 	fcb->EccBlockNEccType = BF_VAL(fl1, BCH_FLASHLAYOUT1_ECCN);
 	fcb->BCHType = BF_VAL(fl1, BCH_FLASHLAYOUT1_GF13_0_GF14_1);
-- 
2.30.2