[PATCH] net: rtl8169: make it work on big-endian system
Antony Pavlov
antonynpavlov at gmail.com
Thu Jun 16 02:03:51 PDT 2022
Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
---
drivers/net/rtl8169.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 80997dc89f4..341f5f240e4 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -230,13 +230,13 @@ static void rtl8169_init_ring(struct rtl8169_priv *priv)
for (i = 0; i < NUM_RX_DESC; i++) {
if (i == (NUM_RX_DESC - 1))
priv->rx_desc[i].status =
- BD_STAT_OWN | BD_STAT_EOR | PKT_BUF_SIZE;
+ cpu_to_le32(BD_STAT_OWN | BD_STAT_EOR | PKT_BUF_SIZE);
else
priv->rx_desc[i].status =
- BD_STAT_OWN | PKT_BUF_SIZE;
+ cpu_to_le32(BD_STAT_OWN | PKT_BUF_SIZE);
priv->rx_desc[i].buf_addr =
- virt_to_phys(priv->rx_buf + i * PKT_BUF_SIZE);
+ cpu_to_le32(virt_to_phys(priv->rx_buf + i * PKT_BUF_SIZE));
}
}
@@ -358,21 +358,21 @@ static int rtl8169_eth_send(struct eth_device *edev, void *packet,
priv->tx_desc[entry].buf_Haddr = 0;
priv->tx_desc[entry].buf_addr =
- virt_to_phys(priv->tx_buf + entry * PKT_BUF_SIZE);
+ cpu_to_le32(virt_to_phys(priv->tx_buf + entry * PKT_BUF_SIZE));
if (entry != (NUM_TX_DESC - 1)) {
priv->tx_desc[entry].status =
- BD_STAT_OWN | BD_STAT_FS | BD_STAT_LS |
- ((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN);
+ cpu_to_le32(BD_STAT_OWN | BD_STAT_FS | BD_STAT_LS |
+ ((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN));
} else {
priv->tx_desc[entry].status =
- BD_STAT_OWN | BD_STAT_EOR | BD_STAT_FS | BD_STAT_LS |
- ((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN);
+ cpu_to_le32(BD_STAT_OWN | BD_STAT_EOR | BD_STAT_FS | BD_STAT_LS |
+ ((packet_length > ETH_ZLEN) ? packet_length : ETH_ZLEN));
}
RTL_W8(priv, TxPoll, 0x40);
- while (priv->tx_desc[entry].status & BD_STAT_OWN)
+ while (le32_to_cpu(priv->tx_desc[entry].status) & BD_STAT_OWN)
;
dma_sync_single_for_cpu((unsigned long)priv->tx_buf + entry *
@@ -391,9 +391,9 @@ static int rtl8169_eth_rx(struct eth_device *edev)
entry = priv->cur_rx % NUM_RX_DESC;
- if ((priv->rx_desc[entry].status & BD_STAT_OWN) == 0) {
- if (!(priv->rx_desc[entry].status & BD_STAT_RX_RES)) {
- pkt_size = (priv->rx_desc[entry].status & 0x1fff) - 4;
+ if ((le32_to_cpu(priv->rx_desc[entry].status) & BD_STAT_OWN) == 0) {
+ if (!(le32_to_cpu(priv->rx_desc[entry].status) & BD_STAT_RX_RES)) {
+ pkt_size = (le32_to_cpu(priv->rx_desc[entry].status) & 0x1fff) - 4;
dma_sync_single_for_cpu((unsigned long)priv->rx_buf
+ entry * PKT_BUF_SIZE,
@@ -407,14 +407,14 @@ static int rtl8169_eth_rx(struct eth_device *edev)
pkt_size, DMA_FROM_DEVICE);
if (entry == NUM_RX_DESC - 1)
- priv->rx_desc[entry].status = BD_STAT_OWN |
- BD_STAT_EOR | PKT_BUF_SIZE;
+ priv->rx_desc[entry].status = cpu_to_le32(BD_STAT_OWN |
+ BD_STAT_EOR | PKT_BUF_SIZE);
else
priv->rx_desc[entry].status =
- BD_STAT_OWN | PKT_BUF_SIZE;
+ cpu_to_le32(BD_STAT_OWN | PKT_BUF_SIZE);
priv->rx_desc[entry].buf_addr =
- virt_to_phys(priv->rx_buf +
- entry * PKT_BUF_SIZE);
+ cpu_to_le32(virt_to_phys(priv->rx_buf +
+ entry * PKT_BUF_SIZE));
} else {
dev_err(&edev->dev, "rx error\n");
}
--
2.36.1
More information about the barebox
mailing list