[PATCH v1 2/2] ARM: rpi: set uart0-pl0110 clk to 48MHz

Sascha Hauer sha at pengutronix.de
Fri Jan 14 00:30:18 PST 2022


On Fri, Jan 14, 2022 at 09:21:41AM +0100, Oleksij Rempel wrote:
> At least on RPi2 this clock is 48MHz. This issue was not visible,
> becouse amba-pl011 driver was not reseting UART controller after
> changing baudrate. So, clk settings was not updated for some time.

We have an rpi3 and rpi4 in our lab. Could you give this a test on these
boards?

Sascha

> 
> Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
> ---
>  arch/arm/boards/raspberry-pi/rpi-common.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
> index 6c5df6fd69..2684bd5ed7 100644
> --- a/arch/arm/boards/raspberry-pi/rpi-common.c
> +++ b/arch/arm/boards/raspberry-pi/rpi-common.c
> @@ -374,7 +374,7 @@ static int rpi_console_clock_init(void)
>  	clk = clk_fixed("apb_pclk", 0);
>  	clk_register_clkdev(clk, "apb_pclk", NULL);
>  
> -	clk = clk_fixed("uart0-pl0110", 3 * 1000 * 1000);
> +	clk = clk_fixed("uart0-pl0110", 48 * 1000 * 1000);
>  	clk_register_clkdev(clk, NULL, "uart0-pl0110");
>  	clkdev_add_physbase(clk, BCM2835_PL011_BASE, NULL);
>  	clkdev_add_physbase(clk, BCM2836_PL011_BASE, NULL);
> -- 
> 2.30.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list