[PATCH 1/2] Documentation: remove some references to zbarebox.bin

[Ahmad Fatoum]

At least ARM doesn't generate zbarebox.bin anymore. Remove some of the
left-over references.

Reported-by: Frank Wunderlich <frank-w at public-files.de>
Signed-off-by: Ahmad Fatoum <ahmad at a3f.at>
---
 Documentation/boards/mips/qemu-malta.rst | 2 +-
 Documentation/user/barebox.rst           | 7 ++++---
 Documentation/user/pbl.rst               | 3 +--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/boards/mips/qemu-malta.rst b/Documentation/boards/mips/qemu-malta.rst
index fd37d5edb229..44f671638d9d 100644
--- a/Documentation/boards/mips/qemu-malta.rst
+++ b/Documentation/boards/mips/qemu-malta.rst
@@ -35,7 +35,7 @@ Using GXemul
 GXemul supports MIPS Malta except PCI stuff.
 You can use GXemul to run little-endian barebox (use gxemul-malta_defconfig).
 
-N.B. There is no need to swap words in ``zbarebox.bin`` for little-endian GXemul!
+N.B. There is no need to swap words in the barebox binary for little-endian GXemul!
 
 GXemul run string:
 
diff --git a/Documentation/user/barebox.rst b/Documentation/user/barebox.rst
index b6b7a57af300..8634d8e48eef 100644
--- a/Documentation/user/barebox.rst
+++ b/Documentation/user/barebox.rst
@@ -220,10 +220,11 @@ another barebox. For instance, if you mounted a TFTP server to ``/mnt/tftp``
 
   bootm /mnt/tftp/barebox.bin
 
-At least ``barebox.bin`` (with :ref:`pbl` support enabled ``arch/$ARCH/pbl/zbarebox.bin``)
-should be startable second stage. The flash binary (``barebox-flash-image``) may or may not
+At least ``barebox.bin`` (with :ref:`pbl` support enabled ``images/*.pblb``)
+should be startable second stage. The final binaries (``images/*.img``) may or may not
 be startable second stage as it may have SoC specific headers which prevent running second
-stage.
+stage. barebox will usually have handlers in-place to skip these headers, so
+it can chainload itself regardless.
 
 First Steps
 -----------
diff --git a/Documentation/user/pbl.rst b/Documentation/user/pbl.rst
index f9b2d2030559..b0acd1a4f24d 100644
--- a/Documentation/user/pbl.rst
+++ b/Documentation/user/pbl.rst
@@ -13,8 +13,7 @@ PBL is available for ARM and MIPS. It can be enabled in ``make menuconfig`` with
 the ``[*] Pre-Bootloader image`` option.
 
 The user visible difference is that with PBL support ``barebox.bin`` is no longer
-the final binary image, but instead ``arch/$ARCH/pbl/zbarebox.bin``. Use the
-``barebox-flash-image`` link which always points to the correct image.
+the final binary image, but instead the images are placed in ``images/``.
 
 Technical background
 --------------------
-- 
2.33.0