[PATCH 1/2] ddr: imx8m: warn about unsupported frequencies

[Sascha Hauer]

On Mon, Dec 05, 2022 at 02:28:34PM +0100, Ahmad Fatoum wrote:
> When adding a new board with a yet unsupported DDR frequency, PLL
> configuration is silently skipped, leading to a later hang during DDRC
> configuration. Improve the bring up user experience by printing a
> warning in that case. The user is then expected to extend
> imx8mm_fracpll_table, so PBL knows how PLLs should be configured for
> this new frequency.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
>  drivers/ddr/imx8m/ddrphy_utils.c | 1 +
>  1 file changed, 1 insertion(+)

Applied, thanks

Sascha

> 
> diff --git a/drivers/ddr/imx8m/ddrphy_utils.c b/drivers/ddr/imx8m/ddrphy_utils.c
> index c5d94e305086..3e03d4b75c9e 100644
> --- a/drivers/ddr/imx8m/ddrphy_utils.c
> +++ b/drivers/ddr/imx8m/ddrphy_utils.c
> @@ -344,6 +344,7 @@ void ddrphy_init_set_dfi_clk(unsigned int drate_mhz, enum ddrc_type type)
>  	case 400: drate = DDR_400; break;
>  	case 100: drate = DDR_100; break;
>  	default:
> +		pr_warn("Unsupported frequency %u\n", drate_mhz);
>  		return;
>  	}
>  
> -- 
> 2.30.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |