[PATCH 2/2] ddr: imx8m: use pr_warn instead of plain prints

[Ahmad Fatoum]

We already have a pr_fmt, but we aren't making use of this. Change that.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 drivers/ddr/imx8m/ddrphy_utils.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/ddr/imx8m/ddrphy_utils.c b/drivers/ddr/imx8m/ddrphy_utils.c
index 3e03d4b75c9e..98e6ae648aed 100644
--- a/drivers/ddr/imx8m/ddrphy_utils.c
+++ b/drivers/ddr/imx8m/ddrphy_utils.c
@@ -210,7 +210,7 @@ static void dram_enable_bypass(enum ddr_rate drate)
 	const struct imx8m_bypass_config *config = &imx8m_bypass_table[drate];
 
 	if (!config->valid) {
-		printf("No matched freq table entry %u\n", drate);
+		pr_warn("No matched freq table entry %u\n", drate);
 		return;
 	}
 
@@ -239,7 +239,7 @@ static int dram_frac_pll_init(enum ddr_rate drate)
 	const struct imx8mm_fracpll_config *config = &imx8mm_fracpll_table[drate];
 
 	if (!config->valid) {
-		printf("No matched freq table entry %u\n", drate);
+		pr_warn("No matched freq table entry %u\n", drate);
 		return -EINVAL;
 	}
 
@@ -284,7 +284,7 @@ static int dram_sscg_pll_init(enum ddr_rate drate)
 	const struct imx8mq_ssgcpll_config *config = &imx8mq_ssgcpll_table[drate];
 
 	if (!config->valid) {
-		printf("No matched freq table entry %u\n", drate);
+		pr_warn("No matched freq table entry %u\n", drate);
 		return -EINVAL;
 	}
 
-- 
2.30.2