[PATCH 5/7] ARM: Rockchip: rk3568 EVB: Add USB support

[Sascha Hauer]

Enable the USB nodes for the ports found on the rk3568 EVB board.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/dts/rk3568-evb1-v10.dts | 95 ++++++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/arch/arm/dts/rk3568-evb1-v10.dts b/arch/arm/dts/rk3568-evb1-v10.dts
index ca6f9c2803..91e2344195 100644
--- a/arch/arm/dts/rk3568-evb1-v10.dts
+++ b/arch/arm/dts/rk3568-evb1-v10.dts
@@ -87,6 +87,25 @@
 			regulator-off-in-suspend;
 		};
 	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_otg_en>;
+		regulator-name = "vcc5v0_otg";
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+	};
 };
 
 &gmac0 {
@@ -425,6 +444,16 @@
 				<0 RK_PA2 2 &pcfg_pull_none>;
 		};
 	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &sdhci {
@@ -485,3 +514,69 @@
 &uart2 {
 	status = "okay";
 };
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy0_otg {
+	vbus-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "otg";
+	extcon = <&usb2phy0>;
+};
+
+&usbdrd30 {
+	status = "okay";
+};
+
+&usbhost30 {
+	status = "okay";
+};
+
+&combphy0_us {
+	status = "okay";
+};
+
+&combphy1_usq {
+	status = "okay";
+};
+
-- 
2.29.2