NXP Layerscape

[Barbier, Renaud]

After reprograming the barebox image and change the DIP switch to boot from flash 1 instead of using the U-Boot  CPLD command, I got some garbage output on the serial. This is what you mention below.

Some hope.

-----Original Message-----
From: Ahmad Fatoum <a.fatoum at pengutronix.de> 
Sent: 10 June 2021 15:09
To: Barbier, Renaud <renaud.barbier at abaco.com>; Barebox List <barebox at lists.infradead.org>
Subject: Re: NXP Layerscape



[**EXTERNAL SOURCE**]:Please verify the source before clicking link or opening attachment.

Hello Barbier,

On 10.06.21 15:49, Barbier, Renaud wrote:
> I received a NXP  LS1046A-RDB

It doesn't reboot cleanly with a USB serial adapter attached!
Jfyi, gave me a scare first time, when I thought I broke something ^^.

>
> I built barebox for the LS1046A and got the image barebox-ls1046ardb-qspi.image.
> I programmed the image in the alternative SPI bank as per NXP instructions:
> =>    tftp $load_addr
> =>    sf erase 0 +$filesize && sf write $load_addr 0 $filesize
>
> Barebox does not boot.
>
> I did notice that u-boot is at address 0x40100000 while the RCW is at 0x40000000.
> My understanding is that barebox is one image and shall be programmed 
> at offset 0 of the SPI (0x40000000)

Can't comment on that. Sascha did the integration.

> At present I cannot connect my I.C.E. due a pin stuck in my MIPI connector.
>
> Any return on experience is welcome.

Can comment on that: Last time I did this, I wrote some documentation:
https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.barebox.org%2Fdoc%2Flatest%2Fboards%2Flayerscape.html&data=04%7C01%7Crenaud.barbier%40abaco.com%7Cdf668f5e5f2d497d54cb08d92c194c3e%7Ce6f27451899d4d0db8fa88baafa551a7%7C0%7C0%7C637589309423979193%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=SnXT0WYjQMJL%2FwK1LaOK1h7OMUcLiL37cojY2hzP89s%3D&reserved=0

There I flashed barebox from another barebox booted from SD-Card.
I'd assume that should still work. I can't recall how the CPLD needed to be tickled, but it would be helpful to know whether doing it like described in the documentation doesn't work for you.

Cheers,
Ahmad

>
> Cheers,
> Renaud
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists
> .infradead.org%2Fmailman%2Flistinfo%2Fbarebox&data=04%7C01%7Crenau
> d.barbier%40abaco.com%7Cdf668f5e5f2d497d54cb08d92c194c3e%7Ce6f27451899
> d4d0db8fa88baafa551a7%7C0%7C0%7C637589309423989184%7CUnknown%7CTWFpbGZ
> sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3
> D%7C1000&sdata=ORpVZlyPk2o7%2FyVYOkJPeAWNnq2%2FkxKauxep7gvDJ%2Bo%3
> D&reserved=0
>

--
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pengutronix.de%2F&data=04%7C01%7Crenaud.barbier%40abaco.com%7Cdf668f5e5f2d497d54cb08d92c194c3e%7Ce6f27451899d4d0db8fa88baafa551a7%7C0%7C0%7C637589309423989184%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=hB2sfEPHomEzn0ICOo9o%2BfRwu3kpXuSvyGZ%2FP%2FnRmpc%3D&reserved=0  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |