a.fatoum at pengutronix.de
Thu Jun 10 07:09:00 PDT 2021
On 10.06.21 15:49, Barbier, Renaud wrote:
> I received a NXP LS1046A-RDB
It doesn't reboot cleanly with a USB serial adapter attached!
Jfyi, gave me a scare first time, when I thought I broke something ^^.
> I built barebox for the LS1046A and got the image barebox-ls1046ardb-qspi.image.
> I programmed the image in the alternative SPI bank as per NXP instructions:
> => tftp $load_addr
> => sf erase 0 +$filesize && sf write $load_addr 0 $filesize
> Barebox does not boot.
> I did notice that u-boot is at address 0x40100000 while the RCW is at 0x40000000.
> My understanding is that barebox is one image and shall be programmed at offset 0 of the SPI (0x40000000)
Can't comment on that. Sascha did the integration.
> At present I cannot connect my I.C.E. due a pin stuck in my MIPI connector.
> Any return on experience is welcome.
Can comment on that: Last time I did this, I wrote some documentation:
There I flashed barebox from another barebox booted from SD-Card.
I'd assume that should still work. I can't recall how the CPLD
needed to be tickled, but it would be helpful to know whether doing
it like described in the documentation doesn't work for you.
> barebox mailing list
> barebox at lists.infradead.org
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox