[PATCH v2 4/8] video: ssd1307fb: pass par instead of i2c client to write
Michael Tretter
m.tretter at pengutronix.de
Thu Dec 23 08:04:00 PST 2021
By pushing the dependency to i2c down into the write function, the
remaining driver is less dependent on i2c. This allows to delay the
decision to use i2c until the actual bus write.
Signed-off-by: Michael Tretter <m.tretter at pengutronix.de>
---
Changelog:
v2: none
---
drivers/video/ssd1307fb.c | 69 ++++++++++++++++++++-------------------
1 file changed, 35 insertions(+), 34 deletions(-)
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
index 5d160ddf338a..61d0e083a3f7 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/ssd1307fb.c
@@ -93,9 +93,10 @@ static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type)
return array;
}
-static int ssd1307fb_write_array(struct i2c_client *client,
+static int ssd1307fb_write_array(struct ssd1307fb_par *par,
struct ssd1307fb_array *array, u32 len)
{
+ struct i2c_client *client = par->client;
int ret;
len += sizeof(struct ssd1307fb_array);
@@ -109,7 +110,7 @@ static int ssd1307fb_write_array(struct i2c_client *client,
return 0;
}
-static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
+static inline int ssd1307fb_write_cmd(struct ssd1307fb_par *par, u8 cmd)
{
struct ssd1307fb_array *array;
int ret;
@@ -120,7 +121,7 @@ static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
array->data[0] = cmd;
- ret = ssd1307fb_write_array(client, array, 1);
+ ret = ssd1307fb_write_array(par, array, 1);
kfree(array);
return ret;
@@ -181,20 +182,20 @@ static void ssd1307fb_update_display(struct ssd1307fb_par *par)
}
}
- ssd1307fb_write_array(par->client, array, par->width * par->height / 8);
+ ssd1307fb_write_array(par, array, par->width * par->height / 8);
kfree(array);
}
static void ssd1307fb_enable(struct fb_info *info)
{
struct ssd1307fb_par *par = info->priv;
- ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
+ ssd1307fb_write_cmd(par, SSD1307FB_DISPLAY_ON);
}
static void ssd1307fb_disable(struct fb_info *info)
{
struct ssd1307fb_par *par = info->priv;
- ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF);
+ ssd1307fb_write_cmd(par, SSD1307FB_DISPLAY_OFF);
}
static void ssd1307fb_flush(struct fb_info *info)
@@ -215,134 +216,134 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
u32 precharge, dclk, com_invdir, compins;
/* Set initial contrast */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_CONTRAST);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->contrast);
+ ret = ssd1307fb_write_cmd(par, par->contrast);
if (ret < 0)
return ret;
/* Set segment re-map */
if (par->seg_remap) {
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SEG_REMAP_ON);
if (ret < 0)
return ret;
};
/* Set COM direction */
com_invdir = 0xc0 | (par->com_invdir & 0x1) << 3;
- ret = ssd1307fb_write_cmd(par->client, com_invdir);
+ ret = ssd1307fb_write_cmd(par, com_invdir);
if (ret < 0)
return ret;
/* Set multiplex ratio value */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_MULTIPLEX_RATIO);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->height - 1);
+ ret = ssd1307fb_write_cmd(par, par->height - 1);
if (ret < 0)
return ret;
/* set display offset value */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_DISPLAY_OFFSET);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->com_offset);
+ ret = ssd1307fb_write_cmd(par, par->com_offset);
if (ret < 0)
return ret;
/* Set clock frequency */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_CLOCK_FREQ);
if (ret < 0)
return ret;
dclk = ((par->dclk_div - 1) & 0xf) | (par->dclk_frq & 0xf) << 4;
- ret = ssd1307fb_write_cmd(par->client, dclk);
+ ret = ssd1307fb_write_cmd(par, dclk);
if (ret < 0)
return ret;
/* Set precharge period in number of ticks from the internal clock */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_PRECHARGE_PERIOD);
if (ret < 0)
return ret;
precharge = (par->prechargep1 & 0xf) | (par->prechargep2 & 0xf) << 4;
- ret = ssd1307fb_write_cmd(par->client, precharge);
+ ret = ssd1307fb_write_cmd(par, precharge);
if (ret < 0)
return ret;
/* Set COM pins configuration */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_COM_PINS_CONFIG);
if (ret < 0)
return ret;
compins = 0x02 | !(par->com_seq & 0x1) << 4
| (par->com_lrremap & 0x1) << 5;
- ret = ssd1307fb_write_cmd(par->client, compins);
+ ret = ssd1307fb_write_cmd(par, compins);
if (ret < 0)
return ret;
/* Set VCOMH */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_VCOMH);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->vcomh);
+ ret = ssd1307fb_write_cmd(par, par->vcomh);
if (ret < 0)
return ret;
/* Turn on the DC-DC Charge Pump */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_CHARGE_PUMP);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client,
+ ret = ssd1307fb_write_cmd(par,
BIT(4) | (par->device_info->need_chargepump ? BIT(2) : 0));
if (ret < 0)
return ret;
/* Switch to horizontal addressing mode */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_ADDRESS_MODE);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client,
+ ret = ssd1307fb_write_cmd(par,
SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
if (ret < 0)
return ret;
/* Set column range */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_COL_RANGE);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x0);
+ ret = ssd1307fb_write_cmd(par, 0x0);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->width - 1);
+ ret = ssd1307fb_write_cmd(par, par->width - 1);
if (ret < 0)
return ret;
/* Set page range */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_PAGE_RANGE);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x0);
+ ret = ssd1307fb_write_cmd(par, 0x0);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client,
+ ret = ssd1307fb_write_cmd(par,
par->page_offset + (par->height / 8) - 1);
if (ret < 0)
return ret;
/* Turn on the display */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_DISPLAY_ON);
if (ret < 0)
return ret;
@@ -564,7 +565,7 @@ static int ssd1307fb_probe(struct device_d *dev)
}
}
- ssd1307fb_write_array(par->client, array, par->width * par->height / 8);
+ ssd1307fb_write_array(par, array, par->width * par->height / 8);
kfree(array);
dev_info(&client->dev,
--
2.30.2
More information about the barebox
mailing list