[PATCH 3/5] video: ssd1307fb: move i2c setup to single place

[Michael Tretter]

By having the entire i2c dependent initialzation in a single place, it
is easier to make it optional later.

Signed-off-by: Michael Tretter <m.tretter at pengutronix.de>
---
 drivers/video/ssd1307fb.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
index 88c88e3253cf..1538a1b640a3 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/ssd1307fb.c
@@ -387,7 +387,6 @@ static const struct of_device_id ssd1307fb_of_match[] = {
 
 static int ssd1307fb_probe(struct device_d *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
 	struct fb_info *info;
 	struct device_node *node = dev->device_node;
 	const struct of_device_id *match =
@@ -410,10 +409,12 @@ static int ssd1307fb_probe(struct device_d *dev)
 
 	info->priv = par;
 	par->info = info;
-	par->client = client;
 
 	par->device_info = (struct ssd1307fb_deviceinfo *)match->data;
 
+	par->client = to_i2c_client(dev);
+	i2c_set_clientdata(par->client, par);
+
 	par->reset = of_get_named_gpio_flags(node,
 					 "reset-gpios", 0, &of_flags);
 	if (!gpio_is_valid(par->reset) && par->reset == -EPROBE_DEFER) {
@@ -519,8 +520,6 @@ static int ssd1307fb_probe(struct device_d *dev)
 	if (ret < 0)
 		goto reset_oled_error;
 
-	i2c_set_clientdata(client, info);
-
 	if (par->reset > 0) {
 		/* Reset the screen */
 		gpio_set_active(par->reset, 1);
-- 
2.30.2