[PATCH] mci: bcm2835: Don't send MMC_CMD_GO_IDLE_STATE at the end of .init()

[Sascha Hauer]

On Tue, Nov 30, 2021 at 09:30:26PM +0100, Uwe Kleine-König wrote:
> The core sends this command anyhow shortly after calling .init(). So
> doing it in bcm2835_mci_reset() is only overhead if it succeeds and
> if there is a problem it is noticed a tad earlier which has little
> benefit compared to the timeout in bcm2835_mci_wait_command_done().
> 
> So simplify and drop the transfer.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> ---
>  drivers/mci/mci-bcm2835.c | 5 +----
>  1 file changed, 1 insertion(+), 4 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/drivers/mci/mci-bcm2835.c b/drivers/mci/mci-bcm2835.c
> index 4913dc27f8a3..10f588930cda 100644
> --- a/drivers/mci/mci-bcm2835.c
> +++ b/drivers/mci/mci-bcm2835.c
> @@ -352,10 +352,7 @@ static int bcm2835_mci_reset(struct mci_host *mci, struct device_d *mci_dev)
>  	sdhci_write32(&host->sdhci, SDHCI_INT_STATUS,
>  			0xFFFFFFFF);
>  
> -	/*Now write command 0 and see if we get response*/
> -	sdhci_write32(&host->sdhci, SDHCI_ARGUMENT, 0x0);
> -	sdhci_write32(&host->sdhci, SDHCI_TRANSFER_MODE__COMMAND, 0x0);
> -	return bcm2835_mci_wait_command_done(host);
> +	return 0;
>  }
>  
>  static int bcm2835_mci_probe(struct device_d *hw_dev)
> 
> base-commit: f2dd8896846757829fb3033f41b89be3fc037d78
> -- 
> 2.30.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |