[PATCH] ARM: CCMX51: Add new module ID variant
Alexander Shiyan
shc_work at mail.ru
Tue Oct 27 02:52:44 EDT 2020
This adds support for Digi ConnectCore module variant 0x15
Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
arch/arm/boards/ccxmx51/ccxmx51.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boards/ccxmx51/ccxmx51.c b/arch/arm/boards/ccxmx51/ccxmx51.c
index 13fba51fe..09437b047 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51.c
+++ b/arch/arm/boards/ccxmx51/ccxmx51.c
@@ -31,7 +31,7 @@ static const struct ccxmx_ident {
unsigned char eth1:1;
unsigned char wless:1;
unsigned char accel:1;
-} *ccxmx_id, ccxmx51_ids[] = {
+} ccxmx51_ids[] = {
[0x00] = { NULL /* Unknown */, 0, 0, 0, 0, 0, 0 },
[0x01] = { NULL /* Not supported */, 0, 0, 0, 0, 0, 0 },
[0x02] = { "i.MX515 at 800MHz, Wireless, PHY, Ext. Eth, Accel", SZ_512M, 800, 1, 1, 1, 1 },
@@ -52,7 +52,9 @@ static const struct ccxmx_ident {
[0x11] = { "i.MX515 at 800MHz, PHY, Accel", SZ_128M, 800, 1, 0, 0, 1 },
[0x12] = { "i.MX515 at 600MHz, Wireless, PHY, Accel", SZ_512M, 600, 1, 0, 1, 1 },
[0x13] = { "i.MX515 at 800MHz, PHY, Accel", SZ_512M, 800, 1, 0, 0, 1 },
-};
+ [0x14] = { NULL, 0, 0, 0, 0, 0, 0 },
+ [0x15] = { "i.MX515 at 600MHz, PHY, Accel", SZ_512M, 600, 1, 0, 0, 1 },
+}, *ccxmx_id = &ccxmx51_ids[0];
static u32 boardserial;
@@ -228,13 +230,18 @@ static __init int ccxmx51_init(void)
{
char manloc = 'N';
u8 hwid[6];
+ int ret;
if (!ccxmx51_is_compatible())
return 0;
- if ((imx_iim_read(1, 9, hwid, sizeof(hwid)) != sizeof(hwid)) ||
- (hwid[0] < 0x02) || (hwid[0] >= ARRAY_SIZE(ccxmx51_ids))) {
- printf("Unknown board variant (0x%02x). System halted.\n", hwid[0]);
+ ret = imx_iim_read(1, 9, hwid, sizeof(hwid));
+ if ((ret == sizeof(hwid)) && (hwid[0] < ARRAY_SIZE(ccxmx51_ids)))
+ ccxmx_id = &ccxmx51_ids[hwid[0]];
+
+ if (!ccxmx_id->mem_sz) {
+ printf("Unknown/unsupported board variant (0x%02x).\n"
+ "System halted.\n", hwid[0]);
hang();
}
--
2.26.2
More information about the barebox
mailing list