[PATCH] usb: i.MX: improve regulator handling

Marco Felsch m.felsch at pengutronix.de
Wed Oct 21 11:28:09 EDT 2020 

On 20-10-21 16:29, Marco Felsch wrote:
> On 20-10-21 07:49, Uwe Kleine-König wrote:
> > On Tue, Oct 20, 2020 at 04:58:44PM +0200, Marco Felsch wrote:
> > > On 20-10-20 16:28, Marco Felsch wrote:
> > > > On 20-10-20 16:09, Sascha Hauer wrote:
> > > > > On Tue, Oct 20, 2020 at 03:33:17PM +0200, Marco Felsch wrote:
> > > > > > Hi Uwe,
> > > > > > 
> > > > > > On 20-10-20 13:15, Uwe Kleine-König wrote:
> > > > > > > Instead of just ignoring errors related to regulator getting error out.
> > > > > > > In case there is no regulator in the device tree, regulator_get() returns
> > > > > > > the dummy regulator and not an error code, so the change is right for
> > > > > > > this situation, too.
> > > > > > > 
> > > > > > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> > > > > > > ---
> > > > > > >  drivers/usb/imx/chipidea-imx.c | 7 +++++--
> > > > > > >  1 file changed, 5 insertions(+), 2 deletions(-)
> > > > > > > 
> > > > > > > diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c
> > > > > > > index 786beede6d89..dd0e3c1a2a58 100644
> > > > > > > --- a/drivers/usb/imx/chipidea-imx.c
> > > > > > > +++ b/drivers/usb/imx/chipidea-imx.c
> > > > > > > @@ -267,8 +267,11 @@ static int imx_chipidea_probe(struct device_d *dev)
> > > > > > >  	}
> > > > > > >  
> > > > > > >  	ci->vbus = regulator_get(dev, "vbus");
> > > > > > > -	if (IS_ERR(ci->vbus))
> > > > > > > -		ci->vbus = NULL;
> > > > > > > +	if (IS_ERR(ci->vbus)) {
> > > > > > > +		ret = ERR_PTR(ci->vbus);
> > > > > > > +		dev_err(dev, "Cannot get vbus regulator: %s\n", strerror(-ret));
> > > > > > > +		return ret;
> > > > > > 
> > > > > > Returning the error here can cause problems with exisiting boards, e.g.
> > > > > > if the regulator support is missing for the specified vbus regulator.
> > > > > > This is often the case since we have very limited regulator support for
> > > > > > now.
> > > > > 
> > > > > But when there is a regulator we also have to control it, right?
> > > > 
> > > > So you need to add each regulator driver or worst case you need to add
> > > > PMIC drivers.
> > 
> > Right, as if you don't the hardware might be off and USB won't work
> > without a useful error message.
> 
> Adding a warining seems valid to me but returning a error is wrong since
> the mainline driver explicite says: "/* no vbus regulator is needed */".
> 
> > > > If I remember correctly, I added the same for mci which
> > > > broke a lot of boards. Later you reverted those commit. Now Oleksij
> > > > added the regulator support for the fec driver and people are starting 
> > > > to remove the phy-supply handle from the barebox-dt's (commit 84cf5cfa9a
> > > > ("ARM: dts: imx6qdl: pfla02: Remove fec phy-supply")). I'm not again
> > 
> > Looking at 84cf5cfa9a there is at least a comment missing about why this
> > property is deleted. Something like
> > 
> > diff --git a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
> > index b83511cb011f..7a12e2a06be4 100644
> > --- a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
> > +++ b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
> > @@ -84,6 +84,11 @@
> >  };
> >  
> >  &fec {
> > +	/*
> > +	 * barebox doesn't have a driver for the PMIC providing the phy-supply
> > +	 * (dlg,da9063). So remove the phy-supply property and rely on the
> > +	 * PMIC's reset default which has this supply enabled.
> > +	 */
> >  	/delete-property/ phy-supply;
> >  };
> >  
> > 
> > > > this patch, just wanted to show the consequences of it.
> > > 
> > > Sorry I have to correct myself, pls check the linux driver:
> > > 
> > > static int ci_get_platdata(struct device *dev,
> > > 			   struct ci_hdrc_platform_data *platdata)
> > > {
> > > 
> > > ...
> > > 
> > > /* Get the vbus regulator */
> > > platdata->reg_vbus = devm_regulator_get_optional(dev, "vbus");
> > > if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
> > > 	return -EPROBE_DEFER;
> > > } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
> > > 	/* no vbus regulator is needed */
> > > 	platdata->reg_vbus = NULL;
> > > } else if (IS_ERR(platdata->reg_vbus)) {
> > > 	dev_err(dev, "Getting regulator error: %ld\n",
> > > 		PTR_ERR(platdata->reg_vbus));
> > > 	return PTR_ERR(platdata->reg_vbus);
> > > }
> > 
> > The difference between regulator_get and regulator_get_optional is that
> > the former doesn't return -ENODEV but yields the dummy regulator
> > instead. 
> 
> Nope, regulator_get returns dummy-regulators too and -ENODEV is returned
> in case of regulator_get_optional() too, pls. check:
> 
> /* Internal regulator request function */
> struct regulator *_regulator_get(struct device *dev, const char *id,
> 				 enum regulator_get_type get_type)
> {
>     ...
> }

Sorry I read with one eye only...

> > (Yes, this is the inversed semantic compared with
> > gpio_get_optional() and clk_get_optional().) So using
> > devm_regulator_get_optional and ignoring -ENODEV is kind of strange.  So
> > I think the above can be simplified to:
> > 
> > 	platdata->reg_vbus = devm_regulator_get(dev, "vbus");
> > 	if (IS_ERR(platdata->reg_vbus))
> > 		return dev_err_probe(dev, PTR_ERR(platdata->reg_vbus),
> > 				     "Failed to get vbus regulator\n");

This will (re-)introduce the dummy regulator message, pls check commit
782c1c49f3db ("usb: chipidea: core: change vbus-regulator as optional")

Anyway, this is a bit off-topic here.

> > and then it is more obvious that my barebox patch does the same.
> > 
> > Am I missing something?

We don't have dummy regulators and in barebox we need to set it to NULL
instead. A few system integrators also adding supply nodes only to avoid
the dummy regulator message. Technically the regulator nodes most the
time are not required since they relying on their default value, however
those default values are retrieved. Linux has support for a wide range
of regulators and this works fine. In Barebox we don't have this wide
range support and your commit will break existing working boards.

Regards,
  Marco

> > 
> > Best regards
> > Uwe
> > 
> > -- 
> > Pengutronix e.K.                           | Uwe Kleine-König            |
> > Industrial Linux Solutions                 | https://www.pengutronix.de/ |
> 
> 
> 
> > _______________________________________________
> > barebox mailing list
> > barebox at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

More information about the barebox mailing list